Iron oxide nanoparticles were synthesized by precipitation in isobutanol with sodium hydroxide and ammonium hydroxide. The isobutanol played a role of a surfactant in the synthesis. The nanoparticles were calcined for 100 min to 5 hours in the range of 300 to 600°C. The characterization of the samples by FTIR (Fourier-transform infrared) and XRD (X-ray diffraction) confirmed the formation ofγ-Fe2O3(maghemite) from Fe3O4(magnetite) at calcination at 300°C. The morphology and particle size were studied by SEM (scanning electron microscope). Nanoparticles in the range of 11–22 nm prepared at 0.09 M of ferrous chloride exhibited superparamagnetic properties. Nanoparticles synthesized with ferrous chloride and ammonium hydroxide at 75°C and calcined at 530°C for 2 h wereα-Fe2O3(hematite).

Layers of cerium dioxide nanoparticles were prepared on titanium by electrodeposition with organic solution. Three concentrations of cerium ions were used at 31.6 V. The organic solution was isobutanol and titanium foils were used as anodes and cathodes. Currents were monitored during the electrodeposition. Deposition times ranged from 0.5 to 8 h. Deposited Deposited layers were calcined at 700 K for 30 min. The morphology and composition of the deposited layers were examined by scanning electron microscopy (SEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). As-prepared and calcined deposition layers were assayed to be cerium dioxide. The average crystallite size increased from 4 to 7 nm through calcination at 700 K. Sizes of calcined cerium oxide agglomerates were ranging from 73 to 146 nm for 30 min deposition and 209 to 262 nm for 8 h deposition. The electrodeposition efficiencies of 0.5 h deposition at three concentrations were measured to be highest.

No abstract