Modeling, control and analysis of input-series-output-parallel-output-series architecture with common-duty-ratio and input filter [proceedings]. IEEE 19th Workshop on Control and Modeling for Power Electronics (COMPEL),

Comparativa de la respuesta transitoria para diferentes anchos de banda del lazo de control del convertidor CC-CC principal .

This paper demonstrates that in the Phase-Shifted Full-Bridge (PSFB) buck-derived converter, there is a random delay associated with the blanking time produced by the leakage inductance. This random delay predicts the additional phase drop that is present in the frequency response of the open-loop audio-susceptibility transfer function when the converter shows a significant blanking time. The existing models of the PSFB converter do not contemplate the delay and gain differences associated to voltage drop produced in the leakage inductor of the transformer. The small-signal model proposed in this paper is based on the combination of two types of analysis: the first analysis consists of obtaining a small-signal model using the average modeling technique and the second analysis consists of studying the natural response of the power converter. The dynamic modeling of the Phase-Shifted Full-Bridge converter, including the random delay, has been validated by simulations and experimental test.

No abstract

The Power Hardware-In-the-Loop (PHIL) technology provides a powerful tool for testing scenarios where there is a high-power interchange, in which the performance of field tests can be very complex or expensive. When performing PHIL simulations of systems with a high number of components, such as DC-distributed systems on a ship or aircraft, the use of switched or average models of the converters can require the use of expensive commercial real-time digital simulators (RTDS) reducing the advantages of these technology. This paper is focused on the proposal of a reduced order model of converters to be able to perform PHIL analysis of Dc-distributed systems using low resources of the required real-time digital simulator. The paper validates that the proposed reduced-order model is able to determine the stability on the Dc-distributed system in comparison with more complex converter models. Moreover, a comparison between both models regarding the required resources in the implementation in a commercial RTDS platform is performed to validate the benefits of the proposed model in performing PHIL analysis of large power distribution systems.