Novel ultrathin Li(2)MnSiO(4) nanosheets have been prepared in a rapid one pot supercritical fluid synthesis method. Nanosheets structured cathode material exhibits a discharge capacity of ~340 mAh/g at 45 ± 5 °C. This result shows two lithium extraction/insertion performances with good cycle ability without any structural instability up to 20 cycles. The two-dimensional nanosheets structure enables us to overcome structural instability problem in the lithium metal silicate based cathode materials and allows successful insertion/extraction of two complete lithium ions.

No abstract

We develop a simple approach to fabricate graphene-loaded TiO(2) thin films on glass substrates by the spin-coating technique. Our graphene-loaded TiO(2) films were highly conductive and transparent and showed enhanced photocatalytic activities. More significantly, graphene/TiO(2) films displayed superhydrophilicity within a short time even under a white fluorescent light bulb, as compared to a pure TiO(2) film. The enhanced photocatalytic activity of graphene/TiO(2) films is attributed to its efficient charge separation, owing to electrons injection from the conduction band of TiO(2) to graphene. The electroconductivity of the graphene-loaded TiO(2) thin film also contributes to the self-cleaning function by its antifouling effect against particulate contaminants. The present study reveals the ability of graphene as a low cost cocatalyst instead of expensive noble metals (Pt, Pd), and further shows its capability for the application of self-cleaning coatings with transparency. The promising characteristics of (inexpensive, transparent, conductive, superhydrophilic, and highly photocatalytically active) graphene-loaded TiO(2) films may have the potential use in various indoor applications.

Here, we report facile fabrication of Fe3O4-reduced graphene oxide (Fe3O4-RGO) composite by a novel approach, i.e., microwave assisted combustion synthesis of porous Fe3O4 particles followed by decoration of Fe3O4 by RGO. The characterization studies of Fe3O4-RGO composite demonstrate formation of face centered cubic hexagonal crystalline Fe3O4, and homogeneous grafting of Fe3O4 particles by RGO. The nitrogen adsorption-desorption isotherm shows presence of a porous structure with a surface area and a pore volume of 81.67 m(2) g(-1), and 0.106 cm(3) g(-1) respectively. Raman spectroscopic studies of Fe3O4-RGO composite confirm the existence of graphitic carbon. Electrochemical studies reveal that the composite exhibits high reversible Li-ion storage capacity with enhanced cycle life and high coulombic efficiency. The Fe3O4-RGO composite showed a reversible capacity ∼612, 543, and ∼446 mA h g(-1) at current rates of 1 C, 3 C and 5 C, respectively, with a coulombic efficiency of 98% after 50 cycles, which is higher than graphite, and Fe3O4-carbon composite. The cyclic voltammetry experiment reveals the irreversible and reversible Li-ion storage in Fe3O4-RGO composite during the starting and subsequent cycles. The results emphasize the importance of our strategy which exhibited promising electrochemical performance in terms of high capacity retention and good cycling stability. The synergistic properties, (i) improved ionic diffusion by porous Fe3O4 particles with a high surface area and pore volume, and (ii) increased electronic conductivity by RGO grafting attributed to the excellent electrochemical performance of Fe3O4, which make this material attractive to use as anode materials for lithium ion storage.