No abstract

Optical pulses in the 5-femtosecond range are produced by a variety of methods. Although different in technical detail, each method relies on the same three key components: spectral broadening due to the nonlinear optical Kerr effect, dispersion control, and ultrabroadband amplification. The state of the art of ultrashort pulse generation is reviewed with a focus on direct laser oscillator schemes.

Pulses of sub-6-fs duration have been obtained from a Kerr-lens mode-locked Ti:sapphire laser at a repetition rate of 100 MHz and an average power of 300 mW. Fitting an ideal sech(2) to the autocorrelation data yields a 4.8-fs pulse duration, whereas reconstruction of the pulse amplitude profile gives 5.8 fs. The pulse spectrum covers wavelengths from above 950 nm to below 630 nm, extending into the yellow beyond the gain bandwidth of Ti:sapphire. This improvement in bandwidth has been made possible by three key ingredients: carefully designed spectral shaping of the output coupling, better suppression of the dispersion oscillation of the double-chirped mirrors, and a novel broadband semiconductor saturable-absorber mirror.

No abstract

We report on a thin-disk multipass amplifier for ultrashort laser pulses delivering an average output power of 1105 W. The amplifier was seeded by a Trumpf TruMicro5050 laser with a power of 80 W at a wavelength of 1030 nm, pulse duration of 6.5 ps, and repetition rate of 800 kHz. The energy of the amplified pulses is 1.38 mJ with a duration of 7.3 ps. The amplifier exhibits an optical efficiency of 44% and a slope efficiency of 46%. The beam quality was measured to be better than M²=1.25.