SynopsisThe pyrolysis of organic waste polymers to produce fuels and chemicals is of interest to augment petroleum-based processes. The wide variety of pyrolysis products of low yield and the uncertain role that heat transfer rate plays in determining these have been deterrents to utilization in the past. A possible approach to increased selectivity for products is to heat them rapidly and homogeneously with the aim of narrowing the product distribution. A very rapid means of homogeneous heat transfer throughout the substrate is microwave heating. A laboratory study has been done to determine what effect high-intensity microwave energy has on the thermal degradative pathways of cellulose. The product distribution found when cellulose is pyrolyzed in the absence of a microwave discharge is similar to that found in conventional furnace pyrolysis. The major products are levoglucosan (27%), carbon dioxide (2-5%), water, and charred residue. However, the total heat-up and reaction times for even large pellets are reduced to less than 2-3 min when high-intensity microwave irradiation is employed, Effects of pressure and microwave power are reported. Low external gas temperature also prevents secondary reactions.