Vertical alignment (VA) and in‐plane switching modes have been widely used for liquid crystal displays (LCDs). They require a polyimide (PI) alignment layer in the pixel structure. PI‐free LCDs have been proposed to exploit the VA of liquid crystals (LCs) obtained by dissolving dendrimers without PI. In this paper, we report a new PI‐free VA mode with a pixel structure that has in‐plane electrodes. The PI‐free VA is achieved by dissolving an LC dendrimer in a positive LC mixture. We measured the test cell properties and obtained a lower voltage and a higher brightness in the voltage–brightness curve. In addition, we analyzed the alignment surface of LC dendrimer by time‐of‐flight secondary ion mass spectrometry and scanning electron microscopy observations. We found that dendrimer molecules are uniformly adsorbed on the glass surface and that the layer was generally one molecule thick. These properties are responsible for the lower voltage and higher brightness of the PI‐free VA mode. The use of dendrimers allows the PI process to be omitted and reduces the power consumption of the VA mode. It is thus possible to reduce the high manufacturing costs and improve the performance of the VA mode.

After removing liquid crystals (LCs) using hexane cleansing solution, polymer network (PN) structure of polymer stabilized blue phase (PSBP) was analyzed. PN type had different shape in the surface region (nearby glass) and intermediate region. Directly measured PN structure and theoretical polymer line defect on the cubic symmetry were compared. Moreover, analysis of different kind of LC and monomer, PN appeared in membrane state.Keywords polymer stabilized blue phase (PSBP), polymer network structure (PNS), defect, hexane, display. pinning effect. P-80 / M. Kwak SID 2013 DIGEST • 1287

No abstract