No abstract

Aims. The tensile strength of granular matter is of great importance to our understanding of the evolution of comets and to our attempts to reproduce processes on cometary surfaces in laboratory experiments. In this work, we investigate the tensile strength of three different materials and their mixtures, which can be used as cometary analog materials in the laboratory. Methods. We used two types of siliceous dusts and granular water ice whose polydisperse particles were either angular or spherical. Our samples were cooled to below 150 K to better simulate the conditions of a cometary surface and to avoid thermal alteration of the material. We used the Brazilian disk test method to exert stress on the cooled samples and determine the tensile strength at the moment the samples broke. Results. We find that the tensile strength of two component mixtures is strongly dominated by the component with the higher tensile strength. The materials made of mostly angular dust particles have a lower filling fraction, but a higher tensile strength compared to materials made of spherical particles. Furthermore, the tensile strength of the cooled components is substantially lower than the tensile strength of the same components at room temperature. This implies that the surface energy of the investigated materials at low temperatures is significantly lower than previously assumed.

Knowledge of the mechanical properties of protoplanetary and cometary matter is of key importance to better understand the activity of comets and the early stages of planet formation. The tensile strength determines the required pressure to lift off grains, pebbles and agglomerates from the cometary surface and also describes how much strain a macroscopic body can withstand before material failure occurs. As organic materials are ubiquitous in space, they could have played an important role during the planet formation process. This work provides new data on the tensile strength of five different micro-granular organic materials, namely, humic acid, paraffin, brown coal, charcoal and graphite. These materials are investigated by the so-called Brazilian Disc Test and the resulting tensile strength values are normalised to a standard grain size and volume filling factor. We find that the tensile strength of these materials ranges over four orders of magnitude. Graphite and paraffin possess tensile strengths much higher than silica, whereas coals have very low tensile strength values. This work demonstrates that organic materials are not generally stickier than silicates, or water ice, as often believed.

The surface granularity of small Solar System bodies is diverse through the different types of planetary bodies and even for specific objects it is often not known in detail. One of the physical properties that strongly depends on the surface structure is the surface temperature. In highly porous media with large voids, radiation can efficiently transport heat, whereas more compact, micro-porous structures transport the heat primarily by conduction through the solid material. In this work, we investigate under which conditions a macro-porous surface can be distinguished from a micro-porous one by simply measuring the surface temperature. In our numerical simulations, we included circular and elliptical orbits with and without obliquity and varied the rotation period of the considered objects. We found that daily temperature cycles are rather insensitive to the specific surface granularity. However, the surface temperature at sunrise shows significant dependency on the material structure and this effect becomes even more pronounced when the solar intensity increases. By measuring the sunrise temperature as a function of insolation at noon, a differentiation between micro- and macro-granular surface structures is possible. In this paper, we provide a strategy how remote sensing can be used to derive the surface structure of small Solar System bodies.

The gas-driven dust activity of comets is still an unresolved question in cometary science. In the past, it was believed that comets are dirty snowballs and that the dust is ejected when the ice retreats. However, thanks to the various space missions to comets, it has become evident that comets have a much higher dust-to-ice ratio than previously thought and that most of the dust mass is ejected in large particles.Here we report on new comet-simulation experiments dedicated to the study of the ejection of dust aggregates caused by the sublimation of solid water ice. We find that dust ejection exactly occurs when the pressure of the water vapor above the ice surface exceeds the tensile strength plus the gravitational load of the covering dust layer. Furthermore, we observed the ejection of clusters of dust aggregates, whose sizes increase with increasing thickness of the ice-covering dust-aggregate layer. In addition, the trajectories of the ejected aggregates suggest that most of the aggregates obtained a non-vanishing initial velocity from the ejection event.