A hybrid crystal–glass metamaterial fiber architecture foregrounds the prospect of intracavity and resonant SHG conversions for monolithically integrated photonic circuits.

In many biomedical applications, broad full-color emission is important, especially for wavelengths below 450 nm, which are difficult to cover via supercontinuum generation. Single-crystalline-core sapphires with defect-driven emissions have potential roles in the development of next-generation broadband light sources because their defect centers demonstrate multiple emission bands with tailored ligand fields. However, the inability to realize high quantum yields with high crystallinity by conventional methods hinders the applicability of ultra-broadband emissions. Here, we present how an effective one-step fiber-drawing process, followed by a simple and controllable thermal treatment, enables a low-loss, full-color, and crystal fiber-based generation with substantial color variability. The broad spectrum extends from 330 nm, which is over 50 nm further into the UV region than that in previously reported results. The predicted submicrometer spatial resolutions demonstrate that the defect–ligand fields are potentially beneficial for achieving in vivo cellular tomography. It is also noteworthy that the efficiency of the milliwatt-level full-color generation, with an optical-to-optical efficiency of nearly 5%, is the highest among that of the existing active waveguide schemes. In addition, direct evidence from high-resolution transmission electron microscopy together with electron energy loss spectroscopy and crystal-field ligands reveals an excellent crystalline core, atomically defined core/cladding interfacial roughness, and significant enhancements in new laser-induced electronic defect levels. Our work suggests an inexpensive, facile, and highly scalable route toward achieving cellular-resolution tomographic imaging and represents an important step in the development of endoscope-compatible diagnostic devices.

integrated perovskite light source in a compact fiber scheme, in which smaller is better, is highly desirable for all-optical onchip interconnects. Most of the reported perovskite lasers have so far been experimentally demonstrated either with pulse excitations or as ultrafast lasers. They have the shortcomings of significant complexity, high cost, and complicated setup (Table S1, Supporting Information), which do not meet the criteria of green energy. Ultrafast pulse pumping also implies that the system is larger than existing fiber devices, requires more hands-on maintenance, and is less reliable, thus increasing the complexity of integration with silicon microelectronics. Recently, a leading-edge 5 nm complementary metal oxide-semiconductor platform was demonstrated by Taiwan Semiconductor Manufacturing Company with a large production batch. [2] This success is expected to be extended to all-fiber photonic integration, thus realizing continuous-wave (CW) perovskite lasers in a fiber configuration is imperative. Despite the vigorous pace in the realization of CW perovskite lasers, the operating temperatures of these lasers have been impractically low, at the cryogenic temperature of 102 K, or at 77 or Continuous-wave (CW) room-temperature (RT) laser operation with low energy consumption is an ultimate goal for electrically driven lasers. A monolithically integrated perovskite laser in a chip-level fiber scheme is ideal. However, because of the well-recognized air and thermal instabilities of perovskites, laser action in a perovskite has mostly been limited to either pulsed or cryogenic-temperature operations. Most CW laser operations at RT have had poor durability. Here, crystal fibers that have robust and high-heatload nature are shown to be the key to enabling the first demonstration of ultralow-threshold CW RT laser action in a compact, monolithic, and inexpensive crystal fiber/nanoperovskite hybrid architecture that is directly pumped with a 405 nm diode laser. Purcell-enhanced light-matter coupling between the atomically smooth fiber microcavity and the perovskite nanocrystallites gain medium enables a high Q (≈1500) and a high β (0.31). This 762 nm laser outperforms previously reported structures with a record-low threshold of 132 nW and an optical-to-optical slope conversion efficiency of 2.93%, and it delivers a stable output for CW and RT operation. These results represent a significant advancement toward monolithic all-optical integration. Green energy and on-chip photonics have been two of the fastest growing fields in science and technology over the last decade. Metal-halide perovskites and fiber-based devices are both integral to the development of next-generation energy materials and all-optical photonic circuits. [1] A monolithically The ORCID identification number(s) for the author(s) of this article can be found under

We report what we believe to be the first demonstration of a facile approach with controlled geometry for the production of crystal-core ceramic-clad hybrid fibers for scaling fiber devices to high average powers. The process consists of dip coating a solution of polycrystalline alumina onto a high-crystallinity 40-μm-diameter Ti:sapphire single-crystalline core followed by thermal treatments. Comparison of the measured refractive index with high-resolution transmission electron microscopy reveals that a Ca/Si-rich intragranular layer is precipitated at grain boundaries by impurity segregation and liquid-phase formation due to the relief of misfit strain energy in the Al2O3 matrix, slightly perturbing the refractive index and hence the optical properties. Additionally, electron backscatter diffractions supply further evidence that the Ti:sapphire single-crystalline core provides the template for growth into a sacrificial polycrystalline cladding, bringing the core and cladding into a direct bond. The thus-prepared doped crystal core with the undoped crystal cladding was achieved through the abnormal grain-growth process. The presented results provide a general guideline both for controlling crystal growth and for the performance of hybrid materials and provides insights into how one might design single-mode high-power crystal fiber devices.

We demonstrate direct evidence for the first realization of atomically smooth sapphire crystalline fiber cores with a surface variation of only ~1.9 Å. The hybrid glass-clad crystalline cores were grown by a laser-based fiber drawing technique. Because of the improvement in crystal fiber quality, we were able, for the first time, to comprehensively and quantitatively elucidate the correlation between fiber nanostructure and optical loss. We also experimentally demonstrated that high-temperature treatment has a significant impact on defect relaxation and promotes excellent crystallinity, and hence enables low-loss optical wave guiding. The experimentally measured propagation losses in the order of 0.01-0.1 dB/cm are the lowest ever reported among conventional Ti:sapphire channel waveguides and ultrafast-laser-inscribed waveguides, and agree well with the theory. Through experiments and numerical calculation, we have demonstrated that low threshold and high efficiency of Ti:sapphire crystal fiber lasers are possible with the atomic-level roughness, low-loss propagation, and high crystallinity of the Ti:sapphire crystalline core.