No abstract

Layered double hydroxide containing Ni3+ (Mg/AlNi-LDH) was successfully synthesized by co-precipitation in an oxidizing media. The resulted product was characterized using X-ray diffraction, wavelength dispersive X-ray fluorescence spectrometry. The activity of Mg/AlNi-LDH in the process of photodegradation of Congo red dye using UV light irradiation was evaluated. The initial rate of photodegradation of the dye in the presence of LDH is 1.6 times higher than that of UV irradiated solution. The kinetic data obtained for photodegradation process can be adequately described by pseudo-first-order kinetic model. The presence of Mg/AlNi – LDH leads to increased photodegradation yield compared to destruction only by UV irradiation.

Classifications of objects of supply chain management create the basis for managing their sustainability. The author proposes a hierarchy of priorities regarding managed objects − systems, processes and relations, which implies creation of adequate anticrisis measures for operational management of resource flows.The objectives of the study are to clarify and supplement classifications of supply chain management objects based on their qualitative characteristics. The tasks of the study are to identify the problems of classification of objects of supply chain management, to determine the prerequisites and to determine ways to solve these problems.The methodological basis of the research is formed by the provisions of logistics as a science of resource flow management and supply chain management as a science of managing systems and processes of creating value for end users of products and/or services.Logical-structural methods and tools of binary matrices have allowed to develop classifications of flows of the first (A) and second (B) levels, creating basis for adoption of codes of those flows indicating types of systems and processes and ensuring thus their sustainability. The proposed hierarchy of prioritisation of managed objects reveals the dependences that govern the anti-crisis measures of operation management of resource flows. The research results make it possible to eliminate the contradictions between the goals of the supply chain links (suppliers) and requirement chains (consumers) and, on this basis, to organise their effective interaction.

Composite materials that contain tetracationic hydrotalcite-like layered double hydroxide and a cobalt-iron spinel phase were prepared by coprecipitation from a solution of a mixture of magnesium, aluminum, cobalt(II), and iron(III) salts followed by hydrothermal treatment. The iron and cobalt contents in the samples were varied within a broad range. The thermal transformations of the prepared composites were examined by hightemperature X-ray diffraction, and the layered hydroxide phase was found to remain when heated up to 300°C. The specifi c magnetization and magnetic susceptibility of the materials were determined using a vibrating sample magnetometer; a rise in the iron and cobalt contents was found to increase the magnetization up to a certain limit. The obtained samples can be used as magnetic sorbents. The sorption capacity of materials was estimated using Congo red anionic dye as an example.

In the present work amorphous silica-aluminas were synthesized by the coprecipitation method during the hydrolysis of an alcohol solution of tetraethoxysilane (with a tetraethoxysilane: alcohol mass ratio of 1: 1) and 6% aqueous solution of aluminum nitrate at pH values of 1, 3, and 10. The Si/Al molar ratio for all synthesized samples were 4.72 (± 0.29). The amorphous character of the investigated materials was confirmed by X-ray phase analysis. According to the results of scanning electron microscopy, it was found that the resulting powders have particles with a size of 1-20 μm. It was shown that the conditions of synthesis affected the specific surface area and porosity of the materials under study. By the method of low-temperature adsorption-thermodesorption of nitrogen it was established that silica-aluminas obtained under acidic conditions were microporous materials. For the sample obtained under alkaline conditions (pH = 10), the contribution of macropores is very significant. A decrease in surface area is observed as the pH of the synthesis increases. The Hammett indicator method was used to identify and quantify surface centers of different acidity. All studied silica-aluminas are characterized by the presence of both Brønsted basic (pKax from 7 to 12.8) and acidic (pKax from 0 to 7) centers, and Lewis basic (pKax from -4.4 to 0) with a pronounced maximum at pKax = 1.02. It was found that the synthesis conditions had a significant effect on the concentration of active centers. The values of the Hammett function are practically the same for the 3 studied silica-aluminas and describe the studied samples as materials of medium acidity. The variety of Lewis and Brønsted centers on the surface indicates the amphoteric properties of the materials under study. This gives the samples the properties of polyfunctional sorbents and catalysts.