Quantification of yeast flocculation under defined conditions will help to understand the physical mechanisms of the flocculation process used in beer fermentation. Flocculation was quantified by measuring the size of yeast flocs and the number of single cells. For this purpose, a method to measure floc size and number of single cells in situ was developed. In this way, it was possible to quantify the actual flocculation during fermentation, without influencing flocculation. The effects of three physical parameters, floc strength, fluid shear, and yeast cell concentration, on flocculation during beer fermentation, were examined. Increasing floc strength results in larger flocs and lower numbers of single cells. If the fluid shear is increased, the size of the flocs decreases, and the number of single cells remains constant at approximately 10% of the total cells present. The cell concentration also influences flocculation, a reduction of 50% in cell concentration leads to a decrease of about 25% in floc size. The number of single cells decreases in linear proportion to the cell concentration. This means that, during yeast settling at full scale, the number of single cells decreases. The results of this study are used in a model for yeast flocculation. With respect to full scale fermentation the effect of cell concentration will play an important role, for flocculation and sedimentation will occur simultaneously leading to a quasi steady state between these phenomena. © 1997 John Wiley & Sons, Inc. Biotechnol Bioeng 56: 190–200, 1997.

No abstract

No abstract

The capacity of certain yeast strains to flocculate is important to the brewing industry. So is the determination of the flocculation characteristics of a yeast strain. In this study we subdivided the flocculation characteristics into three phenomena. A proposal for the most suitable method to quantify each phenomenon is given. For this, four parameters (bond strength, floe size, settling rate and number of single cells) that serve as a measure to these phenomena have been studied. Next to this, attention is payed to the influence of environmental conditions (temperature, calcium concentration, pH and the hydrodynamic conditions during the test) on the result of the test. During this part of the study the fioccuience of the yeast cells was constant, so the effect of the yeast on the results of the test is excluded. It turned out that the temperature of the medium and the hydrodynamic conditions during the test most strongly influence floe formation. Next to this, medium viscosity is important if the flocculation characteristics are quantified via settling experiments.

Quantification of yeast flocculation under defined conditions will help to understand the physical mechanisms of the flocculation process used in beer fermentation. Flocculation was quantified by measuring the size of yeast flocs and the number of single cells. For this purpose, a method to measure floc size and number of single cells in situ was developed. In this way, it was possible to quantify the actual flocculation during fermentation, without influencing flocculation. The effects of three physical parameters, floc strength, fluid shear, and yeast cell concentration, on flocculation during beer fermentation, were examined. Increasing floc strength results in larger flocs and lower numbers of single cells. If the fluid shear is increased, the size of the flocs decreases, and the number of single cells remains constant at approximately 10% of the total cells present. The cell concentration also influences flocculation, a reduction of 50% in cell concentration leads to a decrease of about 25% in floc size. The number of single cells decreases in linear proportion to the cell concentration. This means that, during yeast settling at full scale, the number of single cells decreases. The results of this study are used in a model for yeast flocculation. With respect to full scale fermentation the effect of cell concentration will play an important role, for flocculation and sedimentation will occur simultaneously leading to a quasi steady state between these phenomena.