This study aims to comprehensively assess the accuracy and precision of five different devices and by incorporating a variety of analytical approaches for measuring countermovement jump height: Qualisys motion system; Force platform; Ergojump; an Accelerometer, and self-made Abalakow jump belt. Twenty-seven male and female physical education students (23.5 ± 3.8 years; height 170 ± 9.1 cm and body mass 69.1 ± 11.4 kg) performed three countermovement jumps simultaneously measured using five devices. The 3D measured displacement obtained through the Qualisys device was considered in this study as the reference value. The best accuracy (difference from 3D measured displacement) and precision (standard deviation of differences) for countermovement jump measurement was found using the Abalakow jump belt (0.8 ± 14.7 mm); followed by the Force platform when employing a double integration method (1.5 ± 13.9 mm) and a flight-time method employed using Qualisys motion system data (6.1 ± 17.1 mm). The least accuracy was obtained for the Ergojump (−72.9 mm) employing its analytical tools and then for the accelerometer and Force platform using flight time approximations (−52.8 mm and −45.3 mm, respectively). The worst precision (±122.7 mm) was obtained through double integration of accelerometer acceleration data. This study demonstrated that jump height measurement accuracy is both device and analytical-approach-dependent and that accuracy and precision in jump height measurement are achievable with simple, inexpensive equipment such as the Abalakow jump belt.

In bone drilling, the temperature and the level of stresses at the bone tissue are function of the drilling parameters. If certain thresholds are exceeded, irreversible damages may occur on the bone tissue. One of the main challenges in the drilling process is to control the associated parameters and even more important, to avoid the surrounding tissue damage. In this study, a dynamic numerical model is developed to determine the thermo-mechanical stresses generated during the bone drilling, using the finite element method. The numerical model incorporates the geometric and dynamic characteristics involved in the drilling processes, as well the developed temperature inside the material. The numerical analysis has been validated by experimental tests using polyurethane foam materials with similar mechanical properties to the human bone. Results suggest that a drill bit with lower drill speed and higher feed rate can reduce the strains and stresses in bone during the drilling process. The proposed numerical model reflected adequately the experimental results and could be useful in determination of optimal drilling conditions that minimise the bone injuries.

density present less damage in drilling process. The developed numerical model proved to be a great tool in this kind of analysis.