Commercially manufactured E-glass fibres were heat-conditioned to mimic the effects of thermal recycling of glass fibre thermosetting composites. Degradation in the strength and surface functionality of heat-treated fibres was identified as a key barrier to reusing the fibres as valuable reinforcement in composite applications. A chemical approach has been developed to address these issues and this included two individual chemical treatments, namely chemical etching and post-silanisation. The effectiveness of the treatments was evaluated for both thermal degraded fibres and corresponding composites. Drastic reduction was observed in the properties of the composites with the heat-conditioned preforms indicating thermally degraded glass fibres have no value for second-life reinforcement without further fibre regeneration. However, significant regeneration to the above properties was successfully obtained through the approach developed in this work and the results strongly demonstrated the feasibility of regeneration of thermally degraded glass fibres for potential closed-loop recycling of thermosetting composites

Results are presented from the ReCoVeR project on the regeneration of the strength of thermally conditioned glass fibres. Thermal recycling of end-of-life glass fibre reinforced composites or composite manufacturing waste delivers fibres with virtually no residual strength or value. Composites produced from such fibres also have extremely poor mechanical performance. Data is presented showing that a short hot sodium hydroxide solution treatment of such recycled fibres can more than triple their strength and restore their ability to act as an effective reinforcement in second life composite materials. The implications of these results for real materials reuse of recycled glass fibres as replacement for pristine reinforcement fibres are discussed