We report on the fabrication of heterojunction solar cells made by deposition of transparent conducting oxide (TCO) films on Cu2O substrates. The TCO films have been grown by ion beam sputtering on good quality Cu2O sheets prepared by oxidizing copper at a high temperature. The best solar cell has reached an open-circuit voltage of 0.595V, a short-circuit current density of 6.78mA∕cm2, a fill factor of 50%, and a conversion efficiency of 2% under simulated AM1.5G illumination, which is the highest efficiency value reported for this kind of heterojunction devices. These devices represent a good starting point for the development of very low cost solar cells.

No abstract

A novel configuration for high-performant perovskite/silicon tandem solar cells is demonstrated using a facile mechanical stacking of the sub-cells. The resulting champion perovskite/silicon tandem solar cell exhibits a stabilized efficiency of 25.9% over an active area of 1.43 cm 2 .

No abstract

Non‐stoichiometric nickel oxide (NiOx) is attracting growing attention due to its characteristics of p‐type transparent conductive layer and to the possibility to tailor its optical and electrical properties. NiOx could also be employed as the electron blocking layer in silicon‐based heterojunction solar cells. However, at present not much work has been done in this direction. In this paper we investigate the optoelectronic characteristics of NiOx thin films and demonstrate the usability of NiOx as emitter layer in silicon based heterostructure solar cells due to its hole collection selectivity. Test heterojunctions show a rectifying behaviour, even if their characteristics are still limited by the density of defects at the c‐Si/NiOx interface, as deduced by comparing the experimental results with numerical simulations. This suggests that the quality of the interface between NiOx and c‐Si needs to be improved, either by optimizing the deposition process of NiOx or by depositing a buffer layer able to carefully passivate the silicon surface and helpfully allow the growth of oxide layer. (© 2016 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)