No abstract

In this research paper, an analysis is developed on the performance of a hybrid ventilation system that combines Earth-to-Air Heat eXchangers (EAHX), free cooling and evaporative cooling Air Handling Unit Heat eXchanger (AHU-HX), all being controlled by a Building Management System (BMS) in a net Zero Energy Building (nZEB), called LUCIA. LUCIA nZEB is the first safe-building against Covid-19 in the world, certified by the international organisation WOSHIE, and located in Valladolid, Spain. The main aim is to optimize the performance of the three systems in such a way that the Indoor Air Quality (IAQ) levels remain within the allowable limits, while maximizing the use of natural resources and minimizing energy consumption and carbon emissions. The approach to satisfy the heating and cooling demand and IAQ levels through zero emissions energy systems is developed, thus anticipating the zero-energy target, set by the European Union for 2050. Results showed that the installed hybrid ventilation system uses heat exchangers for 70% of the operational time, in order to achieve the set parameters successfully. Also, the analysis made by monitoring data, have shown that the control and optimal operation of the hybrid ventilation system allows high energy recovery values with minimum additional electricity consumption. Significant reduction of carbon emissions and operational costs have been achieved.

Thermally activated building systems (TABS) constitute an energy efficient building conditioning solution through the combination of low-exergy space heating and cooling and thermal energy storage (TES) features. Their implementation is, however, complex, due to the number of factors involved in their design and operation. Mathematical models are useful to overcome this, but require validation, while experimental setups to study sensible TES can be bulky and difficult to handle. In this work, a homogeneous concrete slab and a multilayer concrete-sand-gravel slab are built and activated with constant heat flow. Both slabs are experimentally tested and their thermal behaviour is modelled through a 1D finite difference method (FDM). Results demonstrate that materials such as sand and gravel can be used to provide relevant experimental data for TABS heat transfer model validation through a versatile lab test rig. A 1D FDM proves to be a simple, accurate method to predict the thermal behaviour of the slabs during transient peaks in charging and discharging processes as well as during steady-state operation, given that most of the time absolute errors remain below the measurement uncertainty thresholds. Finally, this paper sets a basis to support future experimental work on sensible TES and provides data for further model validation.

Direct evaporative cooling is widely known to be an energy efficient air-conditioning option for arid and semi-arid climates. However, care must be taken on humidity ranges achieved indoors. Existing literature presents several options for integrating evaporative cooling within buildings for passive cooling applications. This work aims at expanding the current knowledge by focusing on the use of water-filled hollow bricks to implement evaporative cooling of air in contact with the brick’s surfaces. A prototype is built and experimentally characterized under controlled air velocity, air temperature and relative humidity conditions. Results on the psychrometric conditions achieved under different geometric arrangements (i.e., with one, two or three rows of four bricks each) are presented and discussed. Insights on likely building integration of the system for passive cooling purposes in farms and agriculture applications are eventually given.

Heat recovery systems installed in Air Handling Units (AHUs) are energy efficient solutions during disparate outdoor-to-indoor temperatures. However, they may be detrimental in terms of a primary energy balance when these temperatures get closer, due to the decrease in the thermal energy recovered compared to the global energy consumption required for their operation. AHUs in surgical areas have certain particularities such as their continuous operation throughout the year, the large airflows supplied and the strict exigencies on the supply air quality, avoiding any cross contamination. This work presents the measurements and analysis performed on a coil heat recovery (run-around) loop system installed in the AHU that serves a mixed-air ventilation operating room in a Hospital Complex. A primary energy balance is studied, including the thermal and electric energy savings achieved, considering the electric energy consumption by the recirculation pump and the additional power requirements of fans due to the pressure drop introduced. The obtained value is then used to predict the thermal energy savings achieved by the heat recovery system. Results are extrapolated to the Typical Meteorological Year to provide an order of magnitude of the primary energy and CO2 emissions saved through the operation of the coil heat recovery system.