No abstract

Summary In this study, the effects of adding a microporous layer (MPL) as well as the impact of its physical properties on polymer electrolyte fuel cell (PEMFC) performance with serpentine flow channels were investigated. In addition, numerical simulations were performed to reveal the effect of relative humidity and operating temperature. It is indicated that adding an extra between the gas diffusion layer (GDL) and catalyst layer (CL), a discontinuity in the liquid saturation shows up at their interface because of differences in the wetting properties of the layers. In addition, results show that a higher MPL porosity causes the liquid water saturation to decrease and the cell performance is improved. A larger MPL thickness reduces the cell performance. The effects of MPL on temperature distribution and thermal transport of the membrane prove that the MPL in addition to being a water management layer also improves the thermal management of the PEMFC.

The solubility of CO 2 in the systems of CO 2 + benzene, CO 2 + n-hexane, and CO 2 + toluene was meticulously measured at (293.15, 298.15, and 308.15) K and different pressures using a pressure-volume-temperature (PVT) apparatus. Also the effect of pressure on the solubility of CO 2 in the organic solvents used in this work was investigated. The Peng-Robinson equation of state (PR EOS) with only one temperature-independent binary interaction parameter was used in correlating the experimental data. The results showed that the PR EOS can accurately correlate the experimental data for the solubility of CO 2 in the organic solvents at high pressure. In case of the systems CO 2 + benzene and CO 2 + n-hexane at 298.15 K, the experimental results obtained from the PVT apparatus were compared with those reported in the literature. The comparison showed that for such systems the results are in good agreement with those of previously published experimental data.

No abstract

No abstract