Estuaries are often modified by human activities. Adjustments in the morphology of an estuary have a potential impact on the hydrodynamics and on the reflection behavior of the tide. The influence of such system changes on the complex tidal regime with a large number of superimposed tidal constituents is not fully understood yet. The reflection properties of estuaries that are characterized by abrupt changes in geometry are systematically investigated on the basis of simplified estuary model approaches to improve the understanding of the oscillation and reflection behavior of tidal waves in estuaries. The reflection coefficients at abrupt cross-sectional changes are determined by two different methods, i.e., an analytical energy-based approach and a hydrodynamic numerical (HN) model. Comparisons indicate a high agreement of the results of the different methods when evaluating the reflection coefficient. The tidal constituents are reflected at partial and total reflectors and amplified by shoaling depending on the water depths, the height of the bottom step and the horizontal constriction. A harmonic analysis of simulated water level data partly shows the formation and amplification of higher harmonic components as a result of shallow water effects. The interaction with reflectors results in an increasing amplification of the tidal constituents and the tide.

Abstract. Marine spatial planning requires reliable data for, e.g., the design of coastal structures, research, or sea level rise adaptation. This task is particularly ambiguous in the German Bight (North Sea, Europe) because a compromise must be found between economic interests and biodiversity since the environmental status is monitored closely by the European Union. For this reason, we have set up an open-access, integrated marine data collection for the period from 1996 to 2015. It provides bathymetry, surface sediments, tidal dynamics, salinity, and waves for the German Bight and is of interest to stakeholders in science, government, and the economy. This part of a two-part publication presents data from numerical hindcast simulations for sea surface elevation, depth-averaged current velocity, bottom shear stress, depth-averaged salinity, wave parameters, and wave spectra. As an improvement to existing data collections, our data represent the variability in the bathymetry by using annually updated model topographies. Moreover, we provide data at a high temporal and spatial resolution (Hagen et al., 2020b); i.e., numerical model results are gridded to 1000 m at 20 min intervals (https://doi.org/10.48437/02.2020.K2.7000.0004). Tidal characteristic values (Hagen et al., 2020a), such as tidal range or ebb current velocity, are computed based on numerical modeling results (https://doi.org/10.48437/02.2020.K2.7000.0003). Therefore, this integrated marine data collection supports the work of coastal stakeholders and scientists, which ranges from developing detailed coastal models to handling complex natural-habitat problems or designing coastal structures.

Many tidal influenced estuaries and coastal basins feature tidal amplification because of, e.g., convergence and reflection. Increasing amplification rates were observed in the Elbe estuary, with consequences for construction measures, nautical manoeuvring, flood protection, riverbed morphology and ecosystems. Although many studies were conducted investigating the tidal wave transformation in estuaries, studies based on spatially well-distributed empirical data covering periods over more than a year are rare. To fill this gap, a self-developed adapted harmonic analysis method of least squares was applied to hydrographs from 25 gauges, distributed over the tidal influenced estuary from the river mouth to the tidal border which is given by the weir 160 km upstream of the river mouth. The investigation period for the harmonic analyses covers a whole nodal cycle of 18.613 a beginning in the year 2000. The tidal constituents’ oscillatory behaviour including the appearance of compound tides, generated by nonlinear shallow water processes, and the formation of reflection induced partially standing waves are determined. The tidal constituents show shared frequency-group specific partial clapotis, but also have significant differences in amplification within those groups. The latter fact contributes to the detected inverse proportionality of tidal range amplification inside the estuary to incoming tidal wave height. As reflection can cause resonance in tidal influenced rivers, tests are developed to analyse whether criteria for resonance are met. To determine the system’s specific resonance frequency, a new method was introduced with the three-parameter Lorentzian curve-fitting. As the detected resonance frequency is not close to tidal frequencies, full-established resonance of the tidal wave and of the tidal constituents is not observed in the Elbe estuary. Migrating nodes of the partially standing tidal wave hint at increasing latent resonance.

Sedimentation of fine-grained sediments in estuaries is a natural physical phenomenon influenced by biogeochemical processes. In the estuarine turbidity maximum (ETM), enhanced net deposition of sediments is observed even in areas with higher hydrodynamic exposure, such as the navigational channel. Maintenance dredging is a common method to maintain the navigational channel, which requires large financial effort and has potential negative impacts on the environment. Research at the Institute for River and Coastal Engineering addresses the challenge of understanding the processes leading to net sedimentation and accumulation in estuarine navigational channels in reach of the ETM. In this contribution, investigations of bed exchange properties of estuarine cohesive sediments conducted in field and laboratory studies are presented. The results provide rarely available and estuary-specific parameters characterizing sediment transport, mainly related to erosion processes. By performing field campaigns within the ETM of the Weser estuary, cores of freshly deposited sediments have been sampled from two sites (Blexer Bogen and Nordenham) along the center of the navigational channel. Sediment characteristics (grain size distribution, water content, loss on ignition, density profiles) have been derived, and the erodibility of the deposits is investigated both quasi in situ and in the laboratory using an erosion microcosm system. Erodibility experiments are run in a closed system so sediment concentration above the lutocline increases during the experiment. This is a unique feature of this study, and it is expected to produce more natural characteristics of net erosion. By proving the reproducibility of the natural structure of the deposited sediments (stratification and density profiles) in the laboratory, systematic studies for analyzing the sensitivity of determined parameters (shear stresses and erosion rates) to varying environmental conditions (settling conditions and density) could be performed. Temporal development of suspended sediment concentration and erosion rates is the main result of the erodibility experiments, from which we derive bandwidths for erosion parameters, like floc erosion rate, critical shear for floc erosion, and critical shear for mass erosion.

Abstract. The German Bight within the central North Sea is of vital importance to many industrial nations in the European Union (EU), which have obligated themselves to ensure the development of green energy facilities and technology, while improving natural habitats and still being economically competitive. These ambitious goals require a tremendous amount of careful planning and considerations, which depends heavily on data availability. For this reason, we established in close cooperation with stakeholders an open-access integrated, marine data collection from 1996 to 2015 for bathymetry, surface sediments, tidal dynamics, salinity, and waves in the German Bight for science, economy, and governmental interest. This second part of a two-part publication presents data products from numerical hindcast simulations for sea surface elevation, current velocity, bottom shear stress, salinity, wave parameters and wave spectra. As an important improvement to existing data collections our model represents the variability of the bathymetry by using annually updated model topographies. Moreover, we provide model results at a high temporal and spatial resolution (Hagen et al. 2020b), i.e. model results are gridded to 1,000 m at 20-minute intervals (https://doi.org/10.48437/02.2020.K2.7000.0004). Tidal characteristic values (Hagen et al. 2020a), such as tidal range or ebb current velocity, are computed based on the numerical modeling results (https://doi.org/10.48437/02.2020.K2.7000.0003). Therefore, this integrated, marine data collection enables coastal stakeholders and scientists to easily enter and participate in countless applications, which could be the development of detailed coastal models, handling of complex natural habitat problems, design of coastal structures, or trend exploration into the future.