Sparingly soluble salts precipitation, e.g. calcium carbonate or calcium sulfate, results in pore clogging in rock formations and in the concomitant reduction of the local permeability of oil wells during the oil extraction processes. On the other hand, in situ controlled salt precipitation is desirable in various applications e.g. waterproofing of concrete constructions suffering from leakages, etc. In the present study, calcium carbonate (CaCO 3 ) precipitation in sandbeds was investigated, in the presence of organic solvents simulating the conditions prevalent in oil-well zones. CaCO 3 precipitation was investigated from supersaturated solutions prepared by in-situ mixing of NaHCO 3 and CaCl 2 .2H 2 O solutions before the inlet of sandbeds. The solution resulting from the mixing of the two solutions was supersaturated with respect to all calcium carbonate polymorphs. Three types of experiments were performed depending on the supersaturated solutions: a) aqueous solutions b) aqueous supersaturated solutions in contact with sandbeds presaturated with n-dodecane c) aqueous solutions containing monoethylene glycol (MEG). Results showed that oil-water interfaces enhanced the heterogeneity of the supersaturated solutions and accelerated crystal growth of calcium carbonate at the inlet of the sandbed, resulting in early pore clogging and limitation of local permeability. Maximum sandbed consolidation was obtained with the solutions containing MEG.

Marble and limestone have been extensively used as building materials in historical monuments. Environmental, physical, chemical and biological factors contribute to stone deterioration. The rehabilitation of stone damage and the delay of further deterioration is of utmost importance. Inorganic nanoparticles having chemical and crystallographic affinity with building materials is very important for the formation of protective coatings or overlayers. In the present work, we have tested the possibility of treating calcitic materials with suspensions of amorphous calcium carbonate (am-CaCO3, ACC) and amorphous silica (AmSiO2). Pentelic marble (PM) was selected as the test material to validate the efficiency of the nanoparticle suspension treatment towards dissolution in undersaturated solutions and slightly acidic pH (6.50). Suspensions of ACC and AnSiO2 nanoparticles were prepared by spontaneous precipitation from supersaturated solutions and by tetraethyl orthosilicate (TEOS) hydrolysis, respectively. The suspensions were quite stable (nine days for ACC and months for AmSiO2). ACC and Am SiO2 particles were deposited on the surface of powdered PM. The rates of dissolution of PM were measured in solutions undersaturated with respect to calcite at a constant pH of 6.50. For specimens treated with ACC and AmSiO2 suspensions, the measured dissolution rates were significantly lower. The extent of the rate of dissolution reduction was higher for AmSiO2 particles on PM. Moreover, application of the nanoparticles on the substrate during their precipitation was most efficient method.

Mortars, which are very important elements for the integrity of historic monuments, consist mainly of calcium carbonate and silicates in different proportions. Chemical dissolution due to exposure in open air is very important for the degradation of mortars. Inorganic nanoparticles with chemical and crystallographic affinity with mortar components are expected to be effective structure stabilizers and agents offering resistance to chemical dissolution. In the present work, we have developed and applied suspensions of amorphous calcium carbonate (ACC), silicon oxide (am-SiO2) and composite nanoparticles by the precipitation of ACC on am-SiO2 and vice versa. The application of suspensions of the synthesized nanoparticles on three different historical mortars of Roman times (1st century AD), retarded their dissolution rate in solutions undersaturated with respect to calcite, in acid pH (6.50, 25 °C). All three test historic mortars, treated with suspensions of the nanoparticles prepared, showed high resistance towards dissolution at pH 6.50. The ability of the nanoparticles’ suspension to consolidate the damaged mortar was the key factor in deciding the corresponding effectiveness in the retardation of the rate of dissolution. The combination of ACC with am-SiO2 nanoparticles showed high efficiency for protection from the dissolution of calcite rich mortars.