We present the synthesis and characterization of a series of photolabile phenacyl derivative polymers and their subsequent thin film preparation. These systems are composed of up to three methacrylate units: a photolabile component including a p-methoxyphenacyl moiety which after selective irradiation (UV/laser) can provide free carboxylic groups in specific areas for further modification; an anchoring unit, trimethoxysiloxane or glycidyl methacrylate derivative, which allows the covalent attachment of the polymer to the substrate; and a spacer, methyl methacrylate or styrene, which in the appropriate proportion ensures the formation of films with good quality. Structural and thermal properties of these materials have been analyzed by means of NMR, FTIR, elemental analysis, UV, gel permeation chromatography, differental scanning calorimetry, and thermogravimetric analysis. The polymers have been subsequently processed by spin coating to render ultrathin films (<50 nm). Topographic and structural characterization studies of the films have been carried out with atomic force microscopy, contact angle measurements, and X-ray photoelectron spectroscopy. The extent of the substrate attachment of the polymers depending on the nature of the anchoring groups have been studied by ellipsometry and FTIR.

Particle track etched polyimide membranes on silicon substrates covered with a native oxide layer are investigated. Preparation steps similar to the common classical particle track etched membrane production, giving rise to free-standing membranes, are successfully applied to the supported membranes. Polyimide films are used as a starting material for a template preparation based on high energy ion irradiation. The film/membrane structure is probed at different length scales by grazing incidence small-angle X-ray scattering at each individual preparation step. In addition, characterization with atomic force microscopy, variable-angle spectroscopic ellipsometry, Fourier transform infrared transmission, and attenuated total reflection spectroscopy is performed. An amount of 6 +/- 1 vol % pores inside the polyimide film is detected. The pores are oriented perpendicular to the substrate surface and have a conical shape, yielding a slightly reduced pore size at the substrate/film interface.