Stationary-phase-assisted modulation is used to overcome one of the limitations of contemporary comprehensive two-dimensional liquid chromatography, which arises from the combination of a first-dimension column that is typically narrow and long and a second-dimension column that is wide and short. Shallow gradients at low flow rates are applied in the first dimension, whereas fast analyses (at high flow rates) are required in the second dimension. Limitations of this approach include a low sample capacity of the first-dimension column and a high dilution of the sample in the complete system. Moreover, the relatively high flow rates used for the second dimension make direct (splitless) hyphenation to mass spectrometry difficult. In the present study we demonstrate that stationary-phase-assisted modulation can be implemented in an online comprehensive two-dimensional LC (LC × LC) setup to shift this paradigm. The proposed active modulation makes it possible to choose virtually any combination of first- and second-dimension column diameters without loss in system performance. In the current setup, a 0.30 mm internal diameter first-dimension column with a relatively high loadability is coupled to a 0.075 mm internal diameter second-dimension column. This actively modulated system is coupled to a nanoelectrospray high-resolution mass spectrometer and applied for the separation of the tryptic peptides of a six-protein mixture and for the proteome-wide analyses of yeast from Saccharomyces cerevisiae. In the latter application, about 20000 MS/MS spectra are generated within 24 h analysis time, resulting in the identification of 701 proteins.

In order to successfully tackle the truly complex separation problems arising from areas such as proteomics research, the development of ultra-efficient and fast separation technology is required. In spatial three-dimensional chromatography, components are separated in the space domain with each peak being characterized by its coordinates in a three-dimensional separation body. Spatial three-dimensional (3D-)LC has the potential to offer unprecedented resolving power when orthogonal retention mechanisms are applied, since the total peak capacity is the product of the three individual peak capacities. Due to parallel developments during the second- and third-dimension separations, the analysis time is greatly reduced compared to a coupled-column multi-dimensional LC approach. This communication discusses the different design aspects to create a microfluidic chip for spatial 3D-LC. The use of physical barriers to confine the flow between the individual developments, and flow control by the use of (2)D and (3)D flow distributors is discussed. Furthermore, the in situ synthesis of monolithic stationary phases is demonstrated. Finally, the potential performance of a spatial 3D-LC systems is compared with the performance obtained with state-of-the-art 1D-LC and (coupled-column) 2D-LC approaches via a Pareto-optimization approach. The proposed microfluidic device for 3D-LC featuring 16 (2)D channels and 256 (3)D channels can potentially yield a peak capacity of 8000 in a total analysis time of 10 minutes.

No abstract