Current understanding of glacier mass balance changes under changing climate is limited by scarcity of in situ measurements in both time and space, as well as resolution of remote sensing products. Recent innovations in unmanned aerial vehicles (UAVs), as well as structure-from-motion photogrammetry (SfM), have led to increased use of digital imagery to derive topographic data in great detail in many fields, including glaciology. This study tested the capability of UAV surveys to detect surface changes over glacier ice during a three-day period in July 2016. Three UAV imaging missions were conducted during this time over 0.185 km 2 of the ablation area of Fountain Glacier, NU. These were processed with the SfM algorithms in Agisoft Photoscan Professional and overall accuracies of the resulting point clouds ranged from 0.030 to 0.043 m. The high accuracy of point clouds achieved here is primarily a result of a small ground sampling distance (0.018 m), and is also influenced by GPS precision. Glacier surface change was measured through differencing of point clouds and change was compared to ablation stake measurements. Surface change measured with the UAV-SfM method agreed with the coincident ablation stake measurements in most instances, with RMSE values of 0.033, 0.028, and 0.042 m for one-, two-, and three-day periods, respectively. Total specific melt over the study area measured with the UAV was 0.170 m water equivalent (w.e.), while interpolation of ablation measurements resulted in 0.144 m w.e. Using UAVs to measure small changes in glacier surfaces will allow for new investigations of distribution of mass balance measurements.

ABSTRACT. Alberta's Bow River has its headwaters in the glaciated eastern slopes of the Canadian Rockies and is a major source of water in southern Alberta. Glacial retreat, declining snowpacks and increased water demand are all expected in the coming century, yet there are relatively few studies focusing on quantifying glacial meltwater in the Bow River. We develop a new radiation-temperature melt model for modelling distributed glacier mass balance and runoff in the Bow River basin. The model reflects physical processes through the incorporation of near-surface air temperature and absorbed radiation, while avoiding problems of collinearity through the use of a radiation-decorrelated temperature index. The model is calibrated at Haig Glacier in the southern portion of the basin and validated at Haig and Peyto Glaciers. Application of the model to the entire Bow River basin for 2000-09 shows glacier ice melt is equivalent to 3% of annual discharge in Calgary on average. Modelled ice melt in August is equal to 8-20% of the August Bow River discharge in Calgary. This emphasizes the importance of glacier runoff to late-summer streamflow in the region, particularly in warm, dry years.

Abstract. Models of glacier surface melt are commonly used in studies of glacier mass balance and runoff; however, with limited data available, most models are validated based on ablation stakes and data from automatic weather stations (AWSs). The technological advances of unmanned aerial vehicles (UAVs) and structure from motion (SfM) have made it possible to measure glacier surface melt in detail over larger portions of a glacier. In this study, we use melt measured using SfM processing of UAV imagery to assess the performance of an energy balance (EB) and enhanced temperature index (ETI) melt model in two dimensions. Imagery collected over a portion of the ablation zone of Fountain Glacier, Nunavut, on 21, 23, and 24 July 2016 was previously used to determine distributed surface melt. An AWS on the glacier provides some measured inputs for both models as well as an additional check on model performance. Modelled incoming solar radiation and albedo derived from UAV imagery are also used as inputs for both models, which were used to estimate melt from 21 to 24 July 2016. Both models estimate total melt at the AWS within 16 % of observations (4 % for ETI). Across the study area the median model error, calculated as the difference between modelled and measured melt (EB = −0.064 m, ETI = −0.050 m), is within the uncertainty of the measurements. The errors in both models were strongly correlated to the density of water flow features on the glacier surface. The relation between water flow and model error suggests that energy from surface water flow contributes significantly to surface melt on Fountain Glacier. Deep surface streams with highly asymmetrical banks are observed on Fountain Glacier, but the processes leading to their formation are missing in the model assessed here. The failure of the model to capture flow-induced melt would lead to significant underestimation of surface melt should the model be used to project future change.

The combined use of unmanned aerial vehicles (UAVs) and structure-from-motion (SfM) is rapidly growing as a cost-effective alternative to airborne laser scanning (lidar) for reconstructing glacier surfaces. Here we present a thorough analysis of the precision and accuracy of a photogrammetric point cloud (PPC) constructed through SfM from UAV-acquired imagery over the spring snow surface at Haig Glacier, Alberta, Canada, the first of its kind in a glaciological setting. An aerial lidar survey conducted concurrently with UAV surveys was used to examine spatial patterns in the PPC accuracy. We found a median error in the PPC of −0.046 ± 0.067 m, with a 95% quantile of 0.218 m. Mean precision of the PPC was 0.199 m, with large spatially clustered outliers. We found an association between high-error, low-precision, and high-surface roughness in the PPC, likely due to illumination characteristics of the snow surface. Glacier surface reconstructions are important for geodetic mass balance measurements, giving key insights into changing climate where in situ measurements are difficult to obtain. The PPC errors are small enough that they would have minimal effects on total mass balance, should the technique be applied across the glacier.

Glacier surficial melt rates are commonly modelled using surface energy balance (SEB) models, with outputs applied to extend point-based mass-balance measurements to regional scales, assess water resource availability, examine supraglacial hydrology and to investigate the relationship between surface melt and ice dynamics. We present an improved SEB model that addresses the primary limitations of existing models by: (1) deriving high-resolution (30 m) surface albedo from Landsat 8 imagery, (2) calculating shadows cast onto the glacier surface by high-relief topography to model incident shortwave radiation, (3) developing an algorithm to map debris sufficiently thick to insulate the glacier surface and (4) presenting a formulation of the SEB model coupled to a subsurface heat conduction model. We drive the model with 6 years of in situ meteorological data from Kaskawulsh Glacier and Nàłùdäy (Lowell) Glacier in the St. Elias Mountains, Yukon, Canada, and validate outputs against in situ measurements. Modelled seasonal melt agrees with observations within 9% across a range of elevations on both glaciers in years with high-quality in situ observations. We recommend applying the model to investigate the impacts of surface melt for individual glaciers when sufficient input data are available.