This study investigated whether short-term modifications of gait could be induced in healthy adults and whether a combination of kinetic (a compliant force resisting deviation of the foot from the prescribed footpath) and visual guidance was superior to either kinetic guidance or visual guidance alone in producing this modification. Thirty-nine healthy adults, 20-33 years old, were randomly assigned to the three groups receiving six 10-min blocks of treadmill training requiring them to modify their footpath to match a scaled-down path. Changes of the footpath, specific joint events and joint moments were analyzed. Persons receiving combined kinetic and visual guidance showed larger modifications of their gait patterns that were maintained longer, persisting up to 2 h after intervening over-ground activities, than did persons receiving training with primarily kinetic guidance or with visual guidance alone. The results emphasize the short-term plasticity of locomotor circuits and provide a possible basis for persons learning to achieve more functional gait patterns following a stroke or other neurological disorders.

Abstract-In this paper, we present the dynamics, control, and preliminary experiments on a wearable upper arm exoskeleton intended for human users with four degrees-of-freedom (dof), driven by six cables. The control of this cable-driven exoskeleton is complicated because the cables can transmit forces to the arm only under tension. The standard PD controllers or Computed torque controllers perform only moderately since the cables need to be in tension. Future efforts will seek to refine these control strategies and their implementations to improve functionality of a human user.

This paper outlines the design of a wearable upper arm exoskeleton that can be potentially used to assist and train arm movements of stroke survivors or subjects with weak musculature. In the last 10 years, a number of upper arm training devices have emerged. However, due to their size and weight, their use is restricted to clinics and research laboratories. Our proposed wearable exoskeleton builds upon our research experience in wire driven manipulators and design of rehabilitative systems. The exoskeleton consists of three main parts: (i) an inverted U-shaped cuff that rests on the shoulder, (ii) a cuff on the upper arm, and (iii) a cuff on the forearm. Six motors mounted on the shoulder cuff drive the cuffs on the upper arm and forearm with the use of cables. In order to assess the performance of this exoskeleton prior to use on humans, a laboratory test-bed has been developed where this exoskeleton is mounted on a model skeleton, instrumented with sensors to measure joint angles. This paper describes the design details of the exoskeleton and addresses the key issue of parameter optimization to achieve a useful workspace based on kinematic and kinetic models. The optimization results have also been motivated from activities of daily living.

This paper presents the design of a wearable upper arm exoskeleton that can be used to assist and train arm movements of stroke survivors or subjects with weak musculature. In the last ten years, a number of upper-arm training devices have emerged. However, due to their size and weight, their use is restricted to clinics and research laboratories. Our proposed wearable exoskeleton builds upon our extensive research experience in wire driven manipulators and design of rehabilitative systems. The exoskeleton consists of three main parts: (i) an inverted U-shaped cuff that rests on the shoulder, (ii) a cuff on the upper arm, and (iii) a cuff on the forearm. Six motors, mounted on the shoulder cuff, drive the cuffs on the upper arm and forearm, using cables. In order to assess the performance of this exoskeleton, prior to use on humans, a laboratory test-bed has been developed where this exoskeleton is mounted on a model skeleton, instrumented with sensors to measure joint angles and transmitted forces to the shoulder. This paper describes design details of the exoskeleton and addresses the key issue of parameter optimization to achieve useful workspace based on kinematic and kinetic models.

Average ratio in integrated hip extensor and knee flexor moments between each of the post-training tests and the baseline test. Values greater or less than 1.0 indicate an increase or decrease, respectively, of the joint moment relative to the baseline test. FFC ? VG force-field constraint plus visual guidance, FFC force-field constraint, VG visual guidance, IPT immediate post-training, R1 retention 1, R2 retention 2. Error bars represent SEM The online version of the original article can be found under