Well-defined molecular layers can be formed on the surface of nanocrystalline anatase TiO2 by photochemically grafting organic molecules bearing a terminal vinyl group. The molecular layers produced are shown to have minimal oxidation and are able to be patterned and uniformly grafted through optically thick nanocrystalline films. Stability tests show that the layers have excellent stability in deionized water at 80 degrees C, aqueous solutions at pH=1.0 and pH=10.3 at 65 degrees C, and acetonitrile for time scales approaching 1200 h. Degradation of the films in deionized water occurs using a AM1.5 full-spectrum solar simulator as an illumination source but is partially suppressed by filtering with a 400 nm UV blocking filter which blocks the above-bandgap light. A mechanism is proposed for the grafting reaction in which the surface hydroxyl groups trap photoexcited holes, facilitating reaction with the vinyl group.

No abstract

TiO2 thin films are highly stable and can be deposited onto a wide variety of substrate materials under moderate conditions. We demonstrate that organic alkenes will graft to the surface of TiO2 when illuminated with UV light at 254 nm and that the resulting layers provide a starting point for the preparation of DNA-modified TiO2 thin films exhibiting excellent stability and biomolecular selectivity. By using alkenes with a protected amino group at the distal end, the grafted layers can be deprotected to yield molecular layers with exposed primary amino groups that can then be used to covalently link DNA oligonucleotides to the TiO2 surface. We demonstrate that the resulting DNA-modified surfaces exhibit excellent selectivity toward complementary versus noncomplementary target sequences in solution and that the surfaces can withstand 25 cycles of hybridization and denaturation in 8.3 M urea with little or no degradation. Furthermore, the use of simple masking methods provides a way to directly control the spatial location of the grafted layers, thereby providing a way to photopattern the spatial distribution of biologically active molecules to the TiO2 surfaces. Using Ti films ranging from 10 to 100 nm in thickness allows the preparation of TiO2 films that range from highly reflective to almost completely transparent; in both cases, the photochemical grafting of alkenes can be used as a starting point for stable surfaces with good biomolecular recognition properties.

Many emerging fields such as biotechnology and renewable energy require functionalized surfaces that are "smart" and highly stable. Surface modification schemes developed previously have often been limited to simple molecules or have been based on weakly bound layers that have limited stability. In this Account, we report on recent developments enabling the preparation of molecular and biomolecular interfaces that exhibit high selectivity and unprecedented stability on a range of covalent materials including diamond, vertically aligned carbon nanofibers, silicon, and metal oxides. One particularly successful pathway to ultrastable interfaces involves the photochemical grafting of organic alkenes to the surfaces. Bifunctional alkenes with a suitable functional group at the distal end can directly impart functionality and can serve as attachment points for linking complex structures such as DNA and proteins. The successful application of photochemical grafting to a surprisingly wide range of materials has motivated researchers to better understand the underlying photochemical reaction mechanisms. The resulting studies using experimental and computational methods have provided fundamental insights into the electronic structure of the molecules and the surface control photochemical reactivity. Such investigations have revealed the important role of a previously unrecognized process, photoelectron emission, in initiating photochemical grafting of alkenes to surfaces. Molecular and biomolecular interfaces formed on diamond and other covalent materials are leading to novel types of molecular electronic interfaces. For example, electrical, optical, or electromechanical structures that convert biological information directly into analytical signals allow for direct label-free detection of DNA and proteins. Because of the preferential adherence of molecules to graphitic edge-plane sites, the grafting of redox-active species to vertically aligned carbon nanofibers leads to good electrochemical activity. Therefore researchers could graft electrocatalytic materials to carbon nanofibers to develop new types of selective electrocatalytic interfaces. Extending this chemistry to include metal oxides such as TiO(2) may lead to highly specific and efficient chemical reactions and new materials with useful applications in photovoltaic and photocatalytic energy conversion.

We demonstrate a modular "click"-based functionalization scheme that allows inexpensive conductive diamond samples to serve as an ultrastable platform for surface-tethered electrochemically active molecules stable out to ∼1.3 V vs Ag/AgCl. We have cycled surface-tethered Ru(tpy)(2) to this potential more than 1 million times with little or no degradation in propylene carbonate and only slightly reduced stability in water and acetonitrile.