No abstract

Carbon fiber composite (CFC) materials have been used for many structural applications for decades. Their electromagnetic properties are also of great interest and are being quantified by recent research. This research explores shielding effectiveness, antenna design, conductivity, reflection, and absorption properties. The work in this paper specifically characterizes the radar cross section (RCS) of CFC structures. Various CFC planar samples were created using a wet layup method and vacuum bagging techniques. These samples were then placed in an anechoic chamber and their RCS values were measured at normal incidence. These measured values were compared to those of aluminum samples made into the same shape as the CFC samples. All of the measurements were made over 7 -12 GHz frequency range. The RCS of the CFC samples show some interesting results. The fiber direction in the CFC samples had great influence on the RCS. Theories and reasoning for the results are presented and discussed.

No abstract

Carbon Fiber Composite (CFC) materials have been used for decades in the aerospace, automotive, and naval industries. They have often been used because of their mechanical advantages. These advantageous characteristics have typically included low weight and high strength. It is also a benefit that CFC materials can be made into nearly any shape or size. With the abundant use of CFC materials, it seems desirable to better understand the electromagnetic applications of these materials. CFC materials consist of a non-conductive resin or epoxy in addition to conductive carbon fibers. The carbon fibers can be oriented and layered in many different configurations. The specific orientation and layering of the carbon fibers has a direct impact on its electrical characteristics. One specific characteristic of interest is the conductivity of CFC materials. The work in this paper deals with probing the conductivity characteristics of CFC materials for applications in antenna and radar design. Multiple layouts of carbon fiber are investigated. The DC conductivity was measured by applying a conductive epoxy to sample edges and using a milliohm meter. Shielding effectiveness was then predicted based on fundamental electromagnetics for conducting media. Finally, prototype dipole antennas made from CFC materials were investigated.

No abstract