No abstract

Current production figures, control measures and discharges from the Swedish pulp and paper industry are described together with future trends and possibilities. The emphasis is on discharges of chlorinated organic substances and internal methods to control such discharges.

Waste rock can contain high concentrations of deleterious trace elements, which upon oxidation can be released, having a significant impact on water quality. Therefore, knowledge about their occurrence and overall mobility is crucial to ensure suitable environmental protection measures. Sulfide-rich waste rock was characterized and quantified using automated mineralogy (QEMSCAN). Selected pyrite grains were analyzed for trace element occurrence using LA-ICP-MS before, during, and after leaching the waste rock in 10 L small-scale test cells for two years to assess trace element occurrence and mobility. Sequential extraction was used to estimate elemental sequestration during the experiment. The high abundance of pyrite (66%) and scarcity of buffering minerals resulted in low pH (<1.3) leachate with high concentrations of trace elements such as As (21 mg/L), Cu (20 mg/L), Hg (13 µg/L, Pb (856 µg/L), Sb (967 µg/L), Tl (317 µg/L ), and Zn (23 mg/L) in solution with limited retention in secondary minerals, primarily due to these elements’ association with pyrite either as inclusions or impurities showing an average abundance of 193 ppm As, 15 ppm Cu, 13 ppm Hg, 20 ppm Pb, 24 ppm Sb, 26 ppm Tl, and 74 ppm Zn in the waste rock. The occurrence of Cu and Zn as inclusions associated with the pyrite led to their extensive mobilization of 79% and 72%, respectively, despite their low abundance in the waste rock. Provided the overall leachability of S (11%) and limited formation of secondary minerals, the average oxidation rate suggests depletion of the pyrite within approximately 18 years. In conclusion, this study shows the importance of detailed mineralogical investigations and early preventive measures of waste rock to ensure sustainable mine waste and water management.

During the operation of a mine, waste rock is often deposited in heaps and usually left under ambient conditions allowing sulfides to oxidize. To focus on waste rock management for preventing acid rock drainage (ARD) formation rather than ARD treatment could avoid its generation and reduce lime consumption, costs, and sludge treatment. Leachates from 10 L laboratory test cells containing sulfide-rich (> 60% pyrite) waste rock with and without the addition of lime kiln dust (LKD) (5 wt.%) were compared to each other to evaluate the LKD’s ability to maintain near neutral pH and reduce the sulfide oxidation. Leaching of solely waste rock generated an acidic leachate (pH < 1.3) with high concentrations of As (21 mg/L), Cu (20 mg/L), Fe (18 g/L), Mn (45 mg/L), Pb (856 μg/L), Sb (967 μg/L), S (17 g/L), and Zn (23 mg/L). Conversely, the addition of 5 wt.% LKD generated and maintained a near neutral pH along with decreasing of metal and metalloid concentrations by more than 99.9%. Decreased concentrations were most pronounced for As, Cu, Pb, and Zn while S was relatively high (100 mg/L) but decreasing throughout the time of leaching. The results from sequential extraction combined with element release, geochemical calculations, and Raman analysis suggest that S concentrations decreased due to decreasing sulfide oxidation rate, which led to gypsum dissolution. The result from this study shows that a limited amount of LKD, corresponding to 4% of the net neutralizing potential of the waste rock, can prevent the acceleration of sulfide oxidation and subsequent release of sulfate, metals, and metalloids but the quantity and long-term stability of secondary minerals formed needs to be evaluated and understood before this method can be applied at a larger scale.

No abstract