No abstract

Energy storage solutions are a vital component of the global transition toward renewable energy sources. The power-to-gas (PtG) concept, which stores surplus renewable energy in the form of methane, has therefore become increasingly relevant in recent years. At present, supported Ni nanoparticles are preferred as industrial catalysts for CO2 methanation due to their low cost and high methane selectivity. However, commercial Ni catalysts are not active enough in CO2 methanation to reach the high CO2 conversion (>99%) required by the specifications for injection in the natural gas grid. Herein we demonstrate the promise of promotion of Ni by Mn, another low-cost base metal, for obtaining very active CO2 methanation catalysts, with results comparable to more expensive precious metal-based catalysts. The origin of this improved performance is revealed by a combined approach of nanoscale characterization, mechanistic study, and density functional theory calculations. Nanoscale characterization with scanning transmission electron microscopy–energy-dispersive X-ray spectroscopy (STEM-EDX) and X-ray absorption spectroscopy shows that NiMn catalysts consist of metallic Ni particles decorated by oxidic Mn2+ species. A mechanistic study combining IR spectroscopy of surface adsorbates, transient kinetic analysis with isotopically labeled CO2, density functional theory calculations, and microkinetics simulations ascertains that the MnO clusters enhance CO2 adsorption and facilitate CO2 activation. A macroscale perspective was achieved by simulating the Ni and NiMn catalytic activity in a Sabatier reactor, which revealed that NiMn catalysts have the potential to meet the demanding PtG catalyst performance requirements and can largely replace the need for expensive and scarce noble metal catalysts.

The use of biomass as a resource for hydrogen production can contribute to the transition towards carbon neutral or carbon negative energy systems. This paper offers a comprehensive investigation of...

Fe, Co, Ni and Cu are the main non-noble industrially significant catalysts in the CO2 and CO gas phase hydrogenation reaction towards hydrocarbons and alcohols. These catalysts are typically supported on metal oxides such as SiO2, TiO2, Al2O3 and ZnO, in order to maximize the activity towards the desired reaction. The role of the supporting material is to stabilize the catalytic nanoparticles and to prevent sintering at the elevated reaction temperatures and pressures. The supporting phase can improve the reaction activity or even have a crucial role in the reaction, as is the case, e.g. for the Methanol synthesis over Cu based catalysts on ZnO. Studying the metals without a supporting oxide phase is of capital importance for the fundamental understanding of the catalytic activity of the metal phase. Therefore, we investigated the pristine transition metals Fe, Co, Ni and Cu (diluted with silica glass beads to avoid sintering) towards their activity in the CO2 hydrogenation reaction and determined the activation energy. An Al2O3 supported Ruthenium catalyst with 0.5 mass percent of Ru loading was taken as reference system. It was found that Co, Ni and Ru/Al2O3 are mostly active in the Sabatier reaction, while Fe is active in the reverse water gas shift reaction. Cu as pristine metal shows no catalytic activity. C2+ hydrocarbons were formed on Co in low concentrations. For the calculation of the activation energy, the kinetically determined temperature range of the reaction is identified with a high resolution in time by means of a quantitative gas analysis method with an online mass spectrometer. The activation energy of the CO2 hydrogenation reaction was determined to be 50 kJ/mol over Fe, 77 kJ/mol over Co, 74 kJ/mol over Ni and 73 kJ/mol over the Ru/Al2O3 catalyst, indicating similar reaction pathways over Co, Ni and Ru/Al2O3 and a different reaction mechanism on Fe.