Controlling fluid flow is a fundamental problem with applications from biomedicine to environmental engineering. Contemporary solutions combine electromechanical sensors, valves, and pumps; however, these are expensive and difficult to maintain. We report an autonomous flow control principle inspired by vascular transport in plants. Combining experiments on real and biomimetic tissues, we show that networks of cells linked by nonlinear valves permit the physical programming of a nearly arbitrary pressure drop versus flow rate relation. The nonlinearity is a consequence of fluid-structure interactions that allow a flexible element to selectively block the valve aperture. We report four applications: parallel connections that function as (i) a nonlinear flow controller, (ii) a constant flow controller, (iii) a reverse Ohm flow controller, and a serial connection that acts as (iv) a fluidic on-off switch.

Pulsating flows are common in many industrial, scientific, and natural fluidic systems. However, because the oscillatory flow component disturbs, e.g., optical measurements, deposition, or industrial processes, it is rarely desired. Moreover, in physiological conditions, pulsation control is desired. We explore the effect of using a plant-inspired nonlinear resistor to smooth the output of a peristaltic pump. Incorporating a 3D printed millifluidic biomimetic device reduces the oscillation amplitudes by 3 orders of magnitude, from 100% to 0.1% of the output flow rate. This represents a tenfold improvement relative to a purely linear resistive-capacitive approach. The observed flow kinetics compare well to a predictive model of peristaltic transport, allowing the further development of optimized fluid-handling systems driven by pulsatile flow. Applications to particle tracking and jetting are considered.

The electric-field-induced and temperature induced dynamics of domains, defects, and phases play an important role in determining the macroscopic functional response of ferroelectric and piezoelectric materials. However, distinguishing and quantifying these phenomena remains a persistent challenge that inhibits our understanding of the fundamental structure–property relationships. In situ dark field x-ray microscopy is a new experimental technique for the real space mapping of lattice strain and orientation in bulk materials. In this paper, we describe an apparatus and methodology for conducting in situ studies of thermally and electrically induced structural dynamics and demonstrate their use on ferroelectric BaTiO3 single crystals. The stable temperature and electric field apparatus enables simultaneous control of electric fields up to ≈2 kV/mm at temperatures up to 200 °C with a stability of ΔT = ±0.01 K and a ramp rate of up to 0.5 K/min. This capability facilitates studies of critical phenomena, such as phase transitions, which we observe via the microstructural change occurring during the electric-field-induced cubic to tetragonal phase transition in BaTiO3 at its Curie temperature. With such systematic control, we show how the growth of the polar phase front and its associated ferroelastic domains fall along unexpected directions and, after several cycles of electric field application, result in a non-reversible lattice strain at the electrode–crystal interface. These capabilities pave the way for new insights into the temperature and electric field dependent electromechanical transitions and the critical influence of subtle defects and interfaces.

The economics, environmental impact, and mechanical properties of paper-based storage containers have been widely studied. However, knowledge of the physical processes relevant to the end-user experience is unavailable. This paper outlines the main effects associated with the closing and opening of telescoping boxes, which are used, for instance, to store and transport board games, footwear, mobile phones, and tablet computers. The sliding motion of the lid is controlled by the flow in a thin film of air in the gap separating the lid and the base of the box. Based on a broad comparison between theory and experiments on real and synthetic boxes, we find that the process is primarily controlled by the shape of the gap between the base and the lid. We derive a master equation for the lid motion and identify the origin of three distinct experimental regimes. Finally, an optimal design for a rapidly closing box is identified.

We use polarized light microscopy in situ with an externally applied electric field to induce square-net birefringence patterns in top-seeded single crystals of barium titanate above the Curie temperature (T C). The patterns occur under a wide range of electric field magnitudes larger than ∼0.2 kV/mm and at temperatures up to 6 • C above T C. We mapped this behavior on a pseudophase diagram showing the region in electric field and temperature space where this domain configuration is stable. We observed the electric field induced transformation into the periodically ordered structure from both the cubic structure above T C and the tetragonal structure below T C. Synchrotron x-ray reciprocal space maps indicate the presence of ferroelastic domains perpendicular to the electric field direction at a range of electric field magnitudes similar to those required to induce the periodic domain ordering we observe using polarized light microscopy. Combined with a simple model of the optical retardation, we show that the periodic domain ordering responsible for the square-net birefringence occurs only at the surfaces of the crystals and that these domain structures are unexpectedly invariant with respect to the electric field that induces them.