When a laser of sufficient intensity is shined into a pigmented transparent medium, the partially absorbed laser light can heat and change the refractive index of the medium in the path of the beam. This altered medium will in turn cause the transmitted laser light to thermally defocus into a series of concentric rings. Some solvents such as 2-propanol and a variety of polymers such as polystyrene, polyethylene terephthalate, and polydimethylsiloxane can be pigmented with a variety of colors. Samples of various colors can be used to spectacularly demonstrate characteristics of light absorption. For example, a 2-propanol solution containing methyl red in red acidic form will absorb a green laser and produce interference rings, but a solution of methyl red in yellow basic form will not. As another example, a red laser beam will pass unaffected through a red pigmented film, but the beam will heat a green film (e.g., from a green pigmented polyethylene terephthalate soda bottle) to produce interference rings. Additionally, since the pattern produced is based on the interference of light waves, these demonstrations reinforce concepts associated with the wave nature of light.