We consider the attributes of a successful engineered material, acknowledging the contributions of composition and processing to properties and performance. We recognize the potential for relevant lessons to be learned from nature, at the same time conceding both the limitations of such lessons and our need to be selective. We then give some detailed attention to the molecular biomimicry of filamentous phage, the process biomimicry of silk and the structure biomimicry of hippopotamus 'sweat', in each case noting that the type of lesson now being learned is not the same as the potential lesson that originally motivated the study.

Reported literature values of the tensile properties of natural silk cover a wide range. While much of this inconsistency is the result of variability that is intrinsic to silk, some is also a consequence of differences in the way that silk is prepared for tensile tests. Here we explore how measured mechanical properties of Bombyx mori cocoon silk are affected by two intrinsic factors (the location from which the silk is collected within the cocoon, and the color of the silk), and two extrinsic factors (the storage conditions prior to testing, and different styles of reeling the fiber). We find that extrinsic and therefore controllable factors can affect the properties more than the intrinsic ones studied. Our results suggest that enhanced inter-laboratory collaborations, that lead to standardized sample collection, handling, and storage protocols prior to mechanical testing, would help to decrease unnecessary (and complicating) variation in reported tensile properties.

Abstract

It has been reported [1] that microwave radiation can enhance many of the mechanical properties of Bombyx mori silkworm cocoon silk, as measured in constant strain rate tensile tests to failure and in stress relaxation tests. The consequences of microwave radiation will affect decisions about the use of silk in settings subjected to significant microwave exposure – for example, as a reinforcing fiber in an epoxy matrix composite that may be microwave cured, or as a component in aircraft radomes.There are two possible mechanisms by which microwave radiation may affect a material [2]: (i) the radiation may enable chemical and/or microstructural changes – and therefore property changes – in the same way that conventional heating would, or (ii) the high heating rates that are achievable by microwaving may selectively favor changes that would be masked under conventional conditions, where heating rates are low enough to give preference to changes that have a lower activation energy. Here we explore the former possibility for silk.We characterized several mechanical properties of degummed and subsequently annealed B. mori silk, and compared them to the corresponding properties of degummed B. mori silk that was not annealed. The annealing treatment was carried out at 140 °C for 7 hours (conditions that optimally increased crystal size in an unrelated study of B. mori silk [3]), and then the fibers were allowed to cool gradually to room temperature over the course of an hour. Comparison of mechanical properties revealed no differences between the materials that we tested. Thus, for annealed silk, we do not observe the enhancements that can be achieved by microwaving. We conclude that in cases where microwaving affects the properties of silk, those changes are not a simple consequence of annealing by the microwaves.

The wasp petiole (waist) is a self-assembled, multifunctional, hierarchically structured tube, which in some species has a simple, near-cylindrical shape that simplifies mechanical property characterization. We describe studies performed by scanning electron microscopy and transmission electron microscopy that reveal several details about the hierarchical structure of mud dauber wasp petiole, including: the number and thickness of the concentric layers of cuticle comprising the wall; the similarity (and differences) between the wall structure and the structure of multi-layer corrugated cardboard; and the different anisotropies of the dorsal and ventral internal surfaces. We also describe a simple experiment in which a petiole is used as a cantilever to determine its stiffness in bending; the result (1.5 GPa) demonstrates a material efficiency in bending similar to that of GFRP and aluminum.Mater. Res. Soc. Symp. Proc. Vol. 975