Converting flow-induced vibrations into electricity for low-power generation has received growing attention over the past few years. Aeroelastic phenomena, good candidates to yield high energy performance in renewable wind energy harvesting (EH) systems, can play a pivotal role in providing sufficient power for extended operation with little or no battery replacement. In this paper, a numerical model and a co-simulation approach have been developed to study a new EH device for power generation. We investigate the problem focusing on a weakly aerodynamically coupled flutter-based EH system. It consists of two flexible wings anchored by cantilevered beams with attached piezoelectric layers, undergoing nonlinear coupled bending–torsion limit cycle oscillations. Besides the development of individual EH devices, further issues are posed when considering multiple objects for realizing a network of devices and magnifying the extracted power due to nonlinear synergies and constructive interferences. This work investigates the effect of various external conditions and physical parameters on the performance of the piezoaeroelastic array of devices. From the viewpoint of applications, we are most concerned about whether an EH can generate sufficient power under a variable excitation. The results of this study can be used for the design and integration of low-energy wind generation technologies into buildings, bridges, and built-in sensor networks in aircraft structures.

In this paper, the authors introduce a model of a strain-based geometrically nonlinear piezoelectric beam for modeling energy harvesters. A nonlinear shear-underfomable 3-D Rayleigh’s beam theory is used to model the displacement fields and can be considered as an interesting alternative to linear and highly nonlinear models commonly presented in the literature. The nonlinearities are introduced to reproduce the behavior of the flexible structure, since moderate to large displacements can occur in response of external loading conditions. The finite element method is used to model the piezolaminated bimorph configuration. Each finite element consists of two piezoelectric energy harvesters embedded or perfectly bonded to an elastic substrate. The electromechanical coupling includes axial and flexural effects as well as additional term that comes from the nonlinearity incorporated into the strain tensor. Additionally, the authors explore briefly two topics for linear harvesters: the influence of the electric domain on the structural properties and, the performance of the harvester near resonance in term of electric power output of a purely resistive network. As a validation case, a cantilevered piezoelectric energy harvester under base excitation is modeled. Alongside, the response to gust of a harvester embedded in a wing structure is analyzed.

No abstract