The worldwide trend in nanoparticle technology toward increasing complexity must be directly linked to more advanced characterization methods of size, shape and related properties, applicable to many different particle systems in science and technology. Available techniques for nanoparticle characterization are predominantly focused on size characterization. However, simultaneous size and shape characterization is still an unresolved major challenge. We demonstrate that analytical ultracentrifugation with a multiwavelength detector is a powerful technique to address multidimensional nanoparticle analysis. Using a high performance optical setup and data acquisition software, information on size, shape anisotropy and optical properties were accessible in one single experiment with unmatched accuracy and resolution. A dynamic rotor speed gradient allowed us to investigate broad distributions on a short time scale and differentiate between gold nanorod species including the precise evaluation of aggregate formation. We report how to distinguish between different species of single-wall carbon nanotubes in just one experiment using the wavelength-dependent sedimentation coefficient distribution without the necessity of time-consuming purification methods. Furthermore, CdTe nanoparticles of different size and optical properties were investigated in a single experiment providing important information on structure-property relations. Thus, multidimensional information on size, density, shape and optical properties of nanoparticulate systems becomes accessible by means of analytical ultracentrifugation equipped with multiwavelength detection.

The optical setup and the performance of a prototype UV/Vis multiwavelength analytical ultracentrifuge (MWL-AUC) is described and compared to the commercially available Optima XL-A from Beckman Coulter. Slight modifications have been made to the optical path of the MWL-AUC. With respect to wavelength accuracy and radial resolution, the new MWL-AUC is found to be comparable to the existing XL-A. Absorbance accuracy is dependent on the light intensity available at the detection wavelength as well as the intrinsic noise of the data. Measurements from single flashes of light are more noisy for the MWL-AUC, potentially due to the absence of flash-to-flash normalization in the current design. However, the possibility of both wavelength and scan averaging can compensate for this and still give much faster scan rates than the XL-A. Some further improvements of the existing design are suggested based on these findings.

Attenuated total reflection-infrared (ATR-IR) spectroscopy is increasingly used to characterize solids and liquids as well as (catalytic) chemical conversion. Here we demonstrate that a piece of silicon wafer cut by a dicing machine or cleaved manually can be used as disposable internal reflection element (IRE) without the need for polishing and laborious edge preparation. Technical aspects, fundamental differences, and pros and cons of these novel disposable IREs and commercial IREs are discussed. The use of a crystal (the Si wafer) in a disposable manner enables simultaneous preparation and analysis of substrates and application of ATR spectroscopy in high temperature processes that may lead to irreversible interaction between the crystal and the substrate. As representative application examples, the disposable IREs were used to study high temperature thermal decomposition and chemical changes of polyvinyl alcohol (PVA) in a titania (TiO(2)) matrix and assemblies of 65-450 nm thick polystyrene (PS) films.

We report on an unsurpassed solution characterization technique based on analytical ultracentrifugation, which demonstrates exceptional potential for resolving particle size in solution with sub-nm resolution. We achieve this improvement in resolution by simultaneously measuring UV-Vis spectra while hydrodynamically separating individual components in the mixture. By equipping an analytical ultracentrifuge with a novel multi-wavelength detector, we are effectively adding a new spectral discovery dimension to traditional hydrodynamic characterization, and amplify the information learned by orders of magnitude. We demonstrate the power of this technique by characterizing unpurified CdTe nanoparticle samples, avoiding tedious and often impossible purification and fractionation of nanoparticles into apparently monodisperse fractions. By using our approach, we have for the first time identified the pure spectral properties and bandgap positions of discrete species present in the CdTe mixture.