No abstract

In areas with high levels of solar radiation, decreasing the amount of solar energy absorbed by the building envelope is useful to reduce the need of air conditioning and "heat island" effects. Most high-reflective products, however, suffer from low durability. The COOL-IT project is developing an innovative high-reflective cement based mortar for precast products to be used as outer layer in buildings for both vertical and horizontal surfaces, or for road pavement. The mix design is aimed at increasing the durability of this cement-based component while retaining high reflectance to solar radiation. This paper presents the preliminary results of the project, based on the simulation of the energy demand of a residential building, intended as a support to optimize the proposed mixes. The model is analysed in three different locations in Italy, for one year of operation. This allows evaluating the trade-off of the energy demand between the winter increase and the summer reduction.

The refurbishment of public residential districts represents a current and complex problem. The Cappuccinelli Social Housing (SH) district in Trapani, designed in the late 1950s by Michele Valori and built during the 1960s, is emblematic of the architectural quality and technological innovation of the time it was designed, but at the same time represents the physical and social decay that occurred just after its construction. The neighborhood was examined through a combination of inspections and documentary research. The inspections were conducted for the entire district in order to identify the recurrent external degradation of building components and the related causes, both physical and anthropogenic. This paper investigates the physical–mechanical degradation and problems connected to previous renovation work in this district. Furthermore, technological design solutions are discussed for deep renovation and energy efficiency improvement of one of the terraced buildings of the Cappuccinelli SH district.