Mouse sepsis models are used to gain insight into the complex processes involved with patients suffering from glucose metabolism disorders. Measuring the expiratory release of (13)CO(2) after administering stable labeled (13)C(6)-glucose enables assessment of the in vivo integrity and functionality of key metabolic processes. In the present study, we demonstrate that Fourier transform infrared spectroscopy operating in the mid-infrared spectral regime (2-20 μm) combined with hollow waveguide gas sensing modules simultaneously serving as a miniaturized gas cell and as a waveguide are capable of quantitatively monitoring (13)CO(2) enrichment levels in low volume mouse breath samples.

Gas analysis via mid-infrared (MIR) spectroscopic techniques has gained significance due to its inherent molecular selectivity and sensitivity probing pronounced vibrational, rotational, and roto-vibrational modes. In addition, MIR gas sensors are suitable for real-time monitoring in a wide variety of sensing scenarios. Our research team has recently introduced so-called substrate-integrated hollow waveguides (iHWGs) fabricated by precision milling, which have been demonstrated to be useful in online process monitoring, environmental sensing, and exhaled breath analysis especially if low sample volumes (i.e., few hundreds of microliters) are probed with rapid signal transients. A logical next step is to establish ultralightweight, potentially disposable, and low-cost substrate-integrated hollow waveguides, which may be readily customized and tailored to specific applications using 3D printing techniques. 3D printing provides access to an unprecedented variety of thermoplastic materials including biocompatible polylactides, readily etchable styrene copolymers, and magnetic or conductive materials. Thus, the properties of the waveguide may be adapted to suit its designated application, e.g., drone-mounted ultralightweight waveguides for environmental monitoring or biocompatible disposable sensor interfaces in medical/clinical applications.

The development of a compact iHWG-ICL gas sensor combining innovative substrate-integrated hollow waveguides (iHWG) with mid-infrared emitting type-II interband cascade lasers (ICL) is presented. Hence, tunable laser absorption spectroscopy (TLAS) with iHWGs in direct absorption mode is enabled. Using a room-temperature distributed feedback (DFB) ICL emitting at approximately 3.366 μm, quantitative sensing of methane was demonstrated. Wavelength scanning was obtained via current tuning for monitoring an isolated line in the v3 fundamental band of CH4. The obtained spectra were compared to calculated spectra derived from the HITRAN2012 database. Furthermore, the performance of iHWGs simultaneously serving as miniaturized gas cell and as efficient optical waveguide at various absorption path lengths was tested and optimized. Calibration functions in the concentration range of 50 to 400 ppmv were established enabling limits of detection ranging from 6 to 28 ppmv. Hence, the combination of iHWGs with ICLs facilitates a new generation of compact optical sensor devices for rapid gas diagnostics in low sample volumes.

Exhaled breath offers monitoring bio markers, as well as diagnosing diseases and therapeutic interventions. In addition, vital functions may be non-invasively monitored online. Animal models are frequently used in research for determining novel therapeutic approaches and/or for investigating biological pathways. The exhaled carbon dioxide concentration, exhaled and inhaled oxygen concentration, and the subsequent respiratory quotient (RQ) offer insight into metabolic activity. One may adapt breath sampling systems and equipment designed for human applications to large animal studies. However, such adaptations are usually impossible for small animals due to their minuscule breath volume. Here, we present a system for the online monitoring of exhaled breath in a 'mouse intensive care unit' (MICU) based on a modified Fourier-transform infrared spectrometer equipped with a substrate-integrated hollow waveguide gas cell, and a luminescence-based oxygen flow-through sensor integrated into the respiratory equipment of the MICU. Thereby, per-minute resolution of O consumption and CO production was obtained, and the 95% confidence range of the determined RQ was ±0.04 or approximately ±5% of the nominal value. Changes in the RQ value caused by intervention in either the metabolic or respiratory system may therefore reliably be detected.

A multiparameter gas sensor based on distributed feedback interband cascade lasers emitting at 4.35 μm and ultrafast electro-spun luminescence oxygen sensors has been developed for the quantification and continuous monitoring of CO/CO isotopic ratio changes and oxygen in exhaled mouse breath samples. Mid-infrared absorption spectra for quantitatively monitoring the enrichment of CO levels were recorded in a miniaturized dual-channel substrate-integrated hollow waveguide using balanced ratiometric detection, whereas luminescence quenching was used for synchronously detecting exhaled oxygen levels. Allan variance analysis verified a CO measurement precision of 1.6‰ during a 480 s integration time. Routine online monitoring of exhaled mouse breath was performed in 14 mechanically ventilated and instrumented mice and demonstrated the feasibility of online isotope-selective exhaled breath analysis within microliters of probed gas samples using the reported combined sensor platform.