Vibration monitoring of rolling element bearings is probably the most established diagnostic technique for rotating machinery. The application of Acoustic Emission (AE) for bearing diagnosis is gaining ground as a complementary diagnostic tool, however, limitations in the successful application of the AE technique have been partly due to the difficulty in processing, interpreting and classifying the acquired data. Furthermore, the extent of bearing damage has eluded the diagnostician. The experimental investigation reported in this paper was centered on the application of the Acoustic Emission technique for identifying the presence and size of a defect on a radially loaded bearing. An experimental test-rig was designed such that defects of varying sizes could be seeded onto the outer race of a test bearing. Comparisons between AE and vibration analysis over a range of speed and load conditions are presented. In addition, the primary source of AE activity from seeded defects is investigated. It is concluded that AE offers earlier fault detection and improved identification capabilities than vibration analysis. Furthermore, the AE technique also provided an indication of the defect size, allowing the user to monitor the rate of degradation on the bearing; unachievable with vibration analysis.

No abstract

Acoustic emission (AE) is gaining ground as a non-destructive technique for health diagnosis on rotating machinery. There are vast opportunities for development of the AE technique on various forms of rotating machinery, including gearboxes. This paper reviews some recent developments in application of AE to gear defect diagnosis. Furthermore, an experimental investigation that examines the effectiveness of AE for gear defect identification is presented. It is concluded that application of the AE technique to seeded gear defect detection is fraught with difficulties. In addition, the viability of the AE technique for gear defect detection from non-rotating components of a machine is called into question. q

No abstract

The focus of this work is the study of the thermal aging of high-performance fibers used in the making of fire protective garments. Accelerated thermal aging tests were carried out on fabric samples made up of a blend of Kevlar V R (poly p-phenylene terephthalamide) and PBI (poly benzimidazole) staple fibers, as well as on yarns pulled from this fabric, by means of exposure to elevated temperatures, comprised between 190 C and 320 C. All samples underwent loss of breaking force retention. The material thermal life, defined as the time required for the fibers to attain a 50% reduction of the original breaking force, ranged between a dozen of days at the lowest exposure temperature, to less than an hour at the highest. Breaking force data were fitted using the Arrhenius model following two different approaches, namely the extrapolated thermal life value and the shift factors yielded by the time-temperature superposition (TTS). The Arrhenius model seemed to describe appropriately the overall aging process, as inferred from the excellent fit obtained when using both approaches, although activation energies provided from both approaches are different. To follow the chemical evolution of the material with thermal aging, Fourier-transform infrared (FTIR) analyses were conducted. The qualitative analysis of the FTIR spectra showed little evidence of chemical changes between the aged and the nonaged samples, indicating either that the aging process carries on without significant modification of the chemical structure of the fibers, or that FTIR is not an appropriate method to spot such a modification.