The Knolls Atomic Power Laboratory (KAPL) and Bettis Atomic Power Laboratory are testing a supercritical carbon dioxide (S-CO2) Brayton power cycle system. The 100 kWe Integrated System Test (IST) is a two shaft recuperated closed Brayton cycle with a variable speed turbine driven compressor and a constant speed turbine driven generator using S-CO2 as the working fluid. The IST was designed to demonstrate operational, control and performance characteristics of an S-CO2 Brayton power cycle over a wide range of conditions. The IST design includes a comprehensive instrumentation and control system incorporating results of turbomachinery operational testing performed at Barber Nichols Inc (BNI) in the Sandia National Laboratory’s DOE test loop. A detailed dynamic performance model was used both to predict IST performance and to evaluate the testing completed at BNI. The IST construction was completed in mid 2011 and is currently undergoing shakedown testing. Results of testing completed to date and future testing plans will be summarized.

Bechtel Marine Propulsion Corporation (BMPC) is testing a supercritical carbon dioxide (S-CO2) Brayton system at the Bettis Atomic Power Laboratory. The Integrated System Test (IST) is a two shaft recuperated closed Brayton cycle with a variable speed turbine driven compressor and a constant speed turbine driven generator using S-CO2 as the working fluid designed to output 100 kWe. The main focus of the IST is to demonstrate operational, control and performance characteristics of an S-CO2 Brayton power cycle over a wide range of conditions. IST operation has reached the point where the system can be operated with the turbine-compressor thermal-hydraulically balanced so that the net output of the system is equal to the turbine-generator output. In this operating mode, power level is changed by using the compressor recirculation valve which changes the fraction of compressor flow that goes to the turbines. Steady-state operation with the turbine-compressor thermal hydraulically balanced at near zero net system power is presented.

Bechtel Marine Propulsion Corporation (BMPC) is testing a supercritical carbon dioxide (S-CO2) Brayton system at the Bettis Atomic Power Laboratory. The 100 kWe integrated system test (IST) is a two shaft recuperated closed Brayton cycle with a variable speed turbine driven compressor and a constant speed turbine driven generator using S-CO2 as the working fluid. The IST was designed to demonstrate operational, control, and per-formance characteristics of an S-CO2 Brayton power cycle over a wide range of condi-tions. Initial operation of the IST has proven a reliable method for startup of the Brayton loop and heatup to normal operating temperature (570 F). An overview of the startup process, including initial loop fill and charging, and heatup to normal operating tempera-ture is presented. Additionally, aspects of the IST startup process which are related to the loop size and component design which may be different for larger systems are discussed. [DOI: 10.1115/1.4026539

Bechtel Marine Propulsion Corporation (BMPC) is testing a supercritical carbon dioxide (sCO2) Brayton system at the Bettis Atomic Power Laboratory. The integrated system test (IST) is a simple recuperated closed Brayton cycle with a variable-speed turbine-driven compressor and a constant-speed turbine-driven generator using sCO2 as the working fluid designed to output 100 kWe. The main focus of the IST is to demonstrate operational, control, and performance characteristics of an sCO2 Brayton power cycle over a wide range of conditions. Therefore, the IST was designed to operate in a configuration and at conditions that support demonstrating the controllability of the closed sCO2 Brayton cycle. Operating at high system efficiency and meeting a specified efficiency target are not requirements of the IST. However, efficiency is a primary driver for many commercial applications of sCO2 power cycles. This paper uses operational data to evaluate component off-nominal performance and predict that design system operation would be achievable.

Supercritical carbon dioxide (sCO2) Brayton power cycles take advantage of the high density of CO2 near the critical point to reduce compressor power and increase cycle efficiency. However, thermophysical properties of CO2 vary drastically near the critical point. Concerns of large property variations and liquid formation within the compressor can result in sCO2 cycle designers selecting compressor inlet operating conditions substantially above the critical point, thereby reducing cycle performance. The Naval Nuclear Laboratory has built and tested the 100 kWe Integrated System Test (IST) to demonstrate the ability to operate and control an sCO2 Brayton power cycle over a wide range of conditions. Since the purpose of the IST is focused on controllability, the design compressor inlet conditions were selected to be 8.2°F (4.6°C) and 270 psi (18.4 bar) above the critical point to reduce the effect of small variations in compressor inlet temperature and pressure on density. This paper evaluates the effect of design compressor inlet pressure on cycle efficiency for a simple recuperated Brayton cycle and the performance of an operating Brayton power cycle with a fixed design over a range of compressor inlet pressures.