Thermoelectric materials, which can generate electricity from waste heat or be used as solid-state Peltier coolers, could play an important role in a global sustainable energy solution. Such a development is contingent on identifying materials with higher thermoelectric efficiency than available at present, which is a challenge owing to the conflicting combination of material traits that are required. Nevertheless, because of modern synthesis and characterization techniques, particularly for nanoscale materials, a new era of complex thermoelectric materials is approaching. We review recent advances in the field, highlighting the strategies used to improve the thermopower and reduce the thermal conductivity.

Materials and Methods 1. Sample preparation method Tl-doped PbTe was made by direct reaction of appropriate amounts of Pb, Te, and Tl 2 Te in a fused-silica tube sealed under a vacuum. Each sample was briefly melted at 1273 K for 24 h and lightly shaken to ensure homogeneity of the liquid, then furnace cooled to 800 K and annealed for 1 week. The obtained ingot was crushed into fine powder and hot-pressed at 803 K for 2 hours under a flowing 4% H 2-Ar atmosphere. The final form of each polycrystalline sample was a 2mm thick disk about 10 mm in diameter. Phase purity was checked by powder X-ray diffraction. No impurity phases were found in the XRD patterns, indicating that all added Tl was dissolved in PbTe. The purities of all starting materials were at least 99.99%. The samples were stable in air at room temperature.

Mitigation of the global energy crisis requires tailoring the thermal conductivity of materials. Low thermal conductivity is critical in a broad range of energy conversion technologies, including thermoelectrics and thermal barrier coatings. Here, we review the chemical trends and explore the origins of low thermal conductivity in crystalline materials. A unifying feature in the latest materials is the incorporation of structural complexity to decrease the phonon velocity and increase scattering. With this understanding, strategies for combining these mechanisms can be formulated for designing new materials with exceptionally low thermal conductivity.