IEEE 802.11ax uplink orthogonal frequency division multiple access (OFDMA)-based random access (UORA) is a new feature for random channel access in wireless local area networks (WLANs). Similar to the legacy random access scheme in WLANs, UORA performs the OFDMA backoff (OBO) procedure to access the channel and decides on a random OBO counter within the OFDMA contention window (OCW) value. An access point (AP) can determine the OCW range and inform each station (STA) of it. However, how to determine a reasonable OCW range is beyond the scope of the IEEE 802.11ax standard. The OCW range is crucial to the UORA performance, and it primarily depends on the number of contending STAs, but it is challenging for the AP to accurately and quickly estimate or keep track of the number of contending STAs without the aid of a specific signaling mechanism. In addition, the one for this purpose incurs an additional delay and overhead in the channel access procedure. Therefore, the performance of a UORA scheme can be degraded by an improper OCW range, especially when the number of contending STAs changes dynamically. We first observed the effect of OCW values on channel efficiency and derived its optimal value from an analytical model. Next, we proposed a simple yet effective OBO control scheme where each STA determines its own OBO counter in a distributed manner rather than adjusting the OCW value globally. In the proposed scheme, each STA determines an appropriate OBO counter depending on whether the previous transmission was successful or not so that collisions can be mitigated without leaving OFDMA resource units unnecessarily idle. The results of a simulation study confirm that the throughput of the proposed scheme is comparable to the optimal OCW-based scheme and is improved by up to 15 times compared to the standard UORA scheme.

No abstract

Abstract-By analyzing the steady state throughput of TCP flows in differentiated service (DiffServ) networks, we show that current DiffServ networks are biased in favor of those flows that have a smaller target rate, which results in unfair bandwidth allocation. In order to solve this unfairness problem, we propose an adaptive marking scheme, which allocates bandwidth in a manner which is proportional to the target rates of the aggregate TCP flows in the DiffServ network. This scheme adjusts the target rate according to the congestion level of the network, so that the aggregate flow can obtain its fair share of the bandwidth. Since it utilizes edge-to-edge feedback information without measuring or keeping any per-flow state, this scheme is scalable and does not require any additional signaling protocol or any significant changes to the current TCP/IP protocol. It can be implemented in a distributed manner using only two-bit feedback information, which is carried in the TCP acknowledgement. Using extensive simulations, we show that the proposed scheme can provide each aggregate flow with its fair share of the bandwidth, which is proportional to the target rate, under various network conditions.

In this paper, we consider relay-based broadcasting in wireless ad hoc networks, which can enable various emerging services in the Internet of Things (IoT). In this kind of traffic dissemination scheme, also known as flooding, all the nodes not only receive frames but also rebroadcast them. However, without an appropriate relay suppression, a broadcast storm problem arises, i.e., the transmission may fail due to severe collisions and/or interference, many duplicate frames are unnecessarily transmitted, and the traffic dissemination time increases. To mitigate the broadcast storm problem, we propose a reasonable criterion to restrict the rebroadcasting named the duplication ratio. Based on this, we propose an efficient mechanism consisting of duplication suppression and re-queuing schemes. The former discards duplicate frames proactively in a probabilistic manner to decrease the redundancy whereas the latter provides a secondary transmission opportunity reactively to compensate for the delivery failure. Moreover, to apply the duplication ratio practically, we propose a simple method to approximate it based on the number of adjacent nodes. The simulation study confirms that the proposed mechanism tightly ensured the reliability and decreased the traffic dissemination time by up to 6-fold compared to conventional mechanisms.

In this study, we address the problem of downlink throughput degradation in dense wireless local area networks (WLANs) based on the IEEE 802.11ax standard. We demonstrate that this problem essentially results from the asymmetric characteristic of carrier sense multiple access between downlink and uplink transmissions in infrastructure WLANs, and it is exacerbated by a dynamic sensitivity control algorithm that aims to improve spatial reuse (SR) in IEEE 802.11ax. To solve this problem, we propose the interference-aware two-level differentiation mechanism consisting of the dual channel access (DCA) and supplemental power control (SPC) schemes. The proposed mechanism introduces a new measure called a spatial reusability indicator, which roughly estimates the signal-to-interference ratio from the received signal strength of beacon frames. Based on this measure, stations (STAs) are classified into the following two categories: spatial reusable STAs (SR-STAs) and non-spatial reusable STAs (NSR-STAs). Because SR-STAs are more robust to interference than NSR-STAs, the DCA scheme prioritizes transmissions to SR-STAs over those to NSR-STAs by using differentiated carrier sensing thresholds. Moreover, the SPC scheme selectively increases the transmission power to NSR-STAs to compensate for transmission failure due to interference. By combining the SPC and DCA schemes, the proposed mechanism effectively differentiates the downlink transmissions to SR-STAs and NSR-STAs in terms of channel access and transmission power, and it can boost the possibility of successful SR. The proposed mechanism can be easily implemented in IEEE 802.11ax without any complex calculation or significant signaling overhead. Moreover, we provide a practical guideline to determine appropriate parameter values for use in the proposed mechanism. The extensive simulation results obtained in this study confirm that the proposed mechanism increases the downlink throughput by more than several times without decreasing the overall throughput, compared to the existing mechanisms, and it maintains fairness between SR-STAs and NSR-STAs in terms of the ratio of successful transmission.