The distribution and absorption of ingested protein was characterized within a colony of Podocoryna carnea when a single polyp was fed. Observations were conducted at multiple spatial and temporal scales at three different stages of colony ontogeny with an artificial food item containing Texas Red conjugated albumin. Food pellets were digested and all tracer absorbed by digestive cells within the first 2–3 hours post-feeding. The preponderance of the label was located in the fed polyp and in a transport-induced diffusion pattern surrounding the fed polyp. After 6 hours post-feeding particulates re-appeared in the gastrovascular system and their absorption increased the area over which the nutrients were distributed, albeit still in a pattern that was centered on the fed polyp. At later intervals, tracer became concentrated in some stolon tips, but not in others, despite the proximity of these stolons either to the fed polyp or to adjacent stolons receiving nutrients. Distribution and absorption of nutrients is sequentially diffusive and directional.

The colonial hydroid Podocoryna carnea grows adherent to surfaces progressing along them by a motile stolon tip. We here ask whether the stolon tip grows preferentially within grooves etched in silicon wafers. In a series of pilot experiments, we varied the dimensions of grooves and found that stolons did not utilize grooves with a width:depth of 5:5 μm or 10:10 μm, occasionally followed grooves 25:25 μm in size, and preferentially grew within grooves of a width:depth of 50:50 μm and 100:50 μm. We then grew colonies in grids, with fixed 50:50 μm width:depth channels intersecting at 90° every 950, 700, 450, or 150 μm. We find that stolons grew within grooves early in colony ontogeny, but remained restricted to them only in the grid pattern with channel intersections every 150 μm. Finally, we created a grid in the shape of the Yale Y logo, with channels of 50:50 μm width:depth and intersections every 100 μm. The resulting colonies conformed to that of the logo. Our findings demonstrate that stolons respond to surface heterogeneity and that surface etching can be used to fabricate microfluidic circuits comprised of hydroid perisarc.