In this work, the authors present the possibility of modification of polymer membranes by TiO2 + AgO coating created by the magnetron sputtering method. The two-component TiO2 + AgO coating can improve and shape new functional properties such as bactericidal and photocatalytic properties. The influence of magnetron power changes on the structure of the membrane was investigated as well. The structure and elemental composition of TiO2 + AgO coatings were analyzed using SEM and EDS technique. All deposited coatings caused a total inhibition of the growth of two investigated colonies of Escherichia coli and Bacillus subtilis on the surface. The photocatalytic properties for membranes covered with oxide coatings were tested under UV irradiation and visible light. The filtration result show that polymer membranes covered with two-component TiO2 + AgO coatings have a permeate flux similar to the non-coated membranes.

Microfiltration (MF) membranes have been widely used for the separation and concentration of various components in food processing, biotechnology and wastewater treatment. The deposition of components from the feed solution and accumulation of bacteria on the surface and in the membrane matrix greatly reduce the effectiveness of MF. This is due to a decrease in the separation efficiency of the membrane, which contributes to a significant increase in operating costs and the cost of exploitative parts. In recent years, significant interest has arisen in the field of membrane modifications to make their surfaces resistant to the deposition of components from the feed solution and the accumulation of bacteria. The aim of this work was to develop appropriate process parameters for the plasma surface deposition of silver oxide (AgO) on MF polyamide membranes, which enables the fabrication of filtration materials with high permeability and antibacterial properties.

This paper addresses the issue of plasma treatment of the surface of polypropylene (PP) using sputtering of silver (Ag) and copper (Cu) and their oxides with MS-PVD in order to impart antimicrobial activity. It was found that plasma treatment of PP with Cu and Ag based layers allows to provide excellent antimicrobial properties due to a constant release of metal ions. The samples of PP treated with Cu and CuO were characterized by highest antimicrobial properties and stability of the coatings. The most stable and least effective coating against bacteria was Ag-PP sample. In turn, AgO-PP was characterized by the lowest stability in aqueous conditions and strong antimicrobial activity. It was found that leaching of metal ions from the surface of treated PP even in exceptional levels plays a crucial role in bactericidal activity. Plazmowa depozycja antybakteryjnych powłok srebra i miedzi na powierzchni polipropylenuStreszczenie: Niniejsza praca dotyczy plazmowej obróbki powierzchni polipropylenu (PP) przy użyciu miedzi (Cu) i srebra (Ag) oraz ich tlenków. Powłoki Cu, CuO, Ag i AgO, wytworzone na powierzchni PP metodą rozpylania magnetronowego MS-PVD, zbadano pod względem morfologii, składu, stabilności i właściwości antybakteryjnych. Materiały powierzchniowo zmodyfikowane przy użyciu Cu i CuO charakteryzowały się najsilniejszymi właściwościami przeciwbakteryjnymi i najmniejszą stabilnością i trwałością w środowisku wodnym. Powłoka AgO wykazywała najmniejszą stabilność w warunkach wodnych i silną aktywność przeciwbakteryjną, natomiast powłoka Ag wykazywała największą stabilność, a zarazem najsłabsze działanie przeciwbakteryjne. Uzyskane wyniki wskazują, że uwalniane z naniesionych powłok jony, nawet w niewielkim stężeniu, wykazują silne działanie antybakteryjne.Słowa kluczowe: polipropylen, obróbka plazmowa, srebro, miedź, właściwości antybakteryjne.