The interaction of a 1053 nm picosecond laser pulse with a solid target has been studied for focused intensities of up to 10 19 W cm Ϫ2. The maximum ion energy cutoff E max ͑which is related to the hot electron temperature͒ is in the range 1.0-12.0 MeV and is shown to scale as E max ϷI 1/3. The hot electron temperatures were in the range 70-400 keV for intensities up to 5ϫ10 18 W cm Ϫ2 with an indication of a high absorption of laser energy. Measurements of x-ray/␥-ray bremsstrahlung emission suggest the existence of at least two electron temperatures. Collimation of the plasma flow has been observed by optical probing techniques.

Protons with energies up to 18 MeV have been measured from high density laser-plasma interactions at incident laser intensities of 5x10(19) W/cm(2). Up to 10(12) protons with energies greater than 2 MeV were observed to propagate through a 125 &mgr;m thick aluminum target and measurements of their angular deflection were made. It is likely that the protons originate from the front surface of the target and are bent by large magnetic fields which exist in the target interior. To agree with our measurements these fields would be in excess of 30 MG and would be generated by the beam of fast electrons which is also observed.

A phenomenological model of wire array Z-pinch implosions, based on the analysis of experimental data obtained on the mega-ampere generator for plasma implosion experiments (MAGPIE) generator [I. H. Mitchell et al., Rev. Sci. Instrum. 67, 1533 (1996)], is described. The data show that during the first ∼80% of the implosion the wire cores remain stationary in their initial positions, while the coronal plasma is continuously jetting from the wire cores to the array axis. This phase ends by the formation of gaps in the wire cores, which occurs due to the nonuniformity of the ablation rate along the wires. The final phase of the implosion starting at this time occurs as a rapid snowplow-like implosion of the radially distributed precursor plasma, previously injected in the interior of the array. The density distribution of the precursor plasma, being peaked on the array axis, could be a key factor providing stability of the wire array implosions operating in the regime of discrete wires. The modified “initial” conditions for simulations of wire array Z-pinch implosions with one-dimension (1D) and two-dimensions (2D) in the r–z plane, radiation-magnetohydrodynamic (MHD) codes, and a possible scaling to a larger drive current are discussed.

Heavy ions with energies up to 430+/-40 MeV have been measured from laser-solid interactions at focused intensities of up to 5x10(19) W/cm(2). Observations of proton emission indicate significant structure in the energy spectrum as well as an angular emission profile which varies with energy. Two qualitatively different components of ion emission are observed: (i) a high-energy component which is likely generated by a combination of "Coulomb explosion" and acceleration by the space charge force from hot electrons which escape the plasma, and (ii) a lower-energy component which forms a ring likely created by magnetic fields in the ablated plasma.

Experimental data [F. N. Beg, Phys. Plasmas 4, 447 (1997)10.1063/1.872103] indicate that for intense short-pulse laser-solid interactions at intensities up to 5 x 10(18) W cm(-2) the hot-electron temperature proportional, variant(Ilambda(2)) (1/3). A fully relativistic analytic model based on energy and momentum conservation laws for the laser interaction with an overdense plasma is presented here. A general formula for the hot-electron temperature is found that closely agrees with the experimental scaling over the relevant intensity range. This scaling is much lower than ponderomotive scaling. Examination of the electron forward displacement compared to the collisionless skin depth shows that electrons experience only a fraction of a laser-light period before being accelerated forward beyond the laser light's penetration region. Inclusion of backscattered light in a modified model indicates that light absorption approaches 80%-90% for intensity >10(19) W cm(-2).