No abstract

High-performance heater films are here proposed. They manifest great applicative potentiality in the de-icing technology of aircraft and motor vehicles. The films are suitable to be integrated into composite structures for the de/anti-icing function, which can be activated if the need arises. The heating is based on the joule effect of the current flowing through the electrically conductive films. Voltage and current parameters have been set based on the generators’ capacities on-board an aircraft and a car, as well as on the energy consumption during the operating conditions and the autonomy in the time. Green processes have been employed through all preparative steps of the films, which are composed of expanded graphite (60% wt/wt) and polyvinyl alcohol (PVA) (40% wt/wt). The results reveal a very significant influence of the aspect ratio of the filler on the heating and de-icing performance and suggest how to enhance the de-icing efficiency saving energy and adapting the current on-board aircraft/car generators for de-icing operations.

From a technological point of view, poly(lactic acid) (PLA) is one of the most important polymers produced from renewable sources, due to its versatility, relatively acceptable processability, and low cost. However, a significant limitation exists in its slow crystallization kinetics, which results in amorphous products having low mechanical properties and thermal resistance. For this reason, quantitative knowledge of the phenomenon of crystallization kinetics is fundamental. In this work, the crystallization kinetics in quiescent conditions of a commercial grade of PLA was analyzed in terms of nucleation and growth rates by direct morphological observations at different crystallization temperatures (Tc) and by calorimetric analysis in isothermal and non‐isothermal conditions. The optical analysis showed a spherulitic morphology with radial growth of the lamellae. The analysis of the growth rate evidenced the α/α'‐crystals polymorphism with a transition temperature of ~120°C. Based on experimental observation, the crystallization kinetics of the two crystalline phases were assessed.

No abstract

No abstract