The lack of river sand is becoming increasingly serious. In this study, we consider how to use sea sand to prepare innovative construction and building materials with excellent mechanical and durability properties. Sulphate corrosion causes expansion, cracking and spalling of concrete, resulting in the reduction or even loss of concrete strength and cementation force. In this paper, artificial seawater, sea sand, industrial waste, steel fiber and polycarboxylate superplasticizer were used to prepare ultra-high-performance polymer cement mortar (SSUHPC), and the sulphate corrosion mechanism was investigated. The strength and cementation force of mortar on the SSUHPC surface decreased and flaked off with the development of sulphate erosion, and the steel fiber rusted and fell off. A 3D model was established based on X-ray computed tomography (X-CT), and the results showed that SSUHPC maintained excellent internal structural characteristics despite severe sulphate erosion on the surface. Mercury intrusion porosimetry (MIP), scanning electron microscopy (SEM) and X-ray diffraction (XRD) techniques were adopted to investigate the sulphate corrosion mechanism of SSUHPC. We found a transition zone within 1–5 mm of the surface of SSUHPC. The Vickers hardness of mortar in this area was increased by 5~15%, and the porosity was reduced to 3.8489%. Obvious structural damage did not occur in this area, but a high content of gypsum appeared. UHPC prepared with seawater sea sand was found to have better sulphate resistance than that prepared with freshwater river sand, which supports the development and utilization of sea sand in concrete.
Concrete is a multi-phase, porous system. The pore structure has an important influence on the properties of the concrete. In this paper, a kind of fiber reinforced mortar was prepared with desert sand and its pore structure was studied. The MIP technique was used to investigate the pore structure characteristics between 1 nm and 500 μm (in diameter). Meanwhile, the μX-CT technique was used to study the pore structure characteristics above 200 μm. It was found that the total porosity tends to decrease first and then increase as the dosage of desert sand increased. The porosity decreased gradually from the upper to bottom area inside the sample, and the diameter of the air voids near the upper area became larger. After curing for 28 days, the compressive strength of fiber reinforced mortar reached the maximum when the content of desert sand was 50%. In conclusion, the appropriate amount of desert sand can reduce the porosity of the fiber reinforced mortar to some extent and the number of large size air voids can be significantly reduced, which improves the pore structure and the mechanical properties of the fiber reinforced mortar.
There are abundant sea-sand resources on the earth. Traditional sea-sand concrete faced various problems relating to insufficient anticorrosion ability. In this paper, artificial seawater, sea sand, industrial waste, steel fiber, and polycarboxylate superplasticizer were used to prepare ultra-high-performance polymer cement mortar (SSUHPC). At the same time, freshwater river-sand ultra-high-performance polymer cement mortar (FRUHPC) with the same mixing ratio was prepared for comparative study. The compressive strength of SSUHPC reached 162.1 MPa, while the that of FRUHPC reached 173.3 MPa, which was slightly higher. Meanwhile, SSUHPC showed excellent anticorrosion characteristics in terms of carbonization, frost resistance and chloride resistance, and especially for sulfate resistance. The composition of SSUHPC was separated into three parts: mortar, pore and steel fiber, and the performance difference mechanisms of SSUHPC and FRUHPC were investigated by X-ray computed tomography (X-CT), mercury intrusion porosimetry (MIP), scanning electron microscopy (SEM), and X-ray diffraction (XRD). The hydration degree of mortar in SSUHPC was higher, with higher content of CSH and CH, and its better optimized gel pore characteristics gave SSUHPC better corrosion resistance. The mechanical properties of SSUHPC were slightly poor due to the uneven dispersion of steel fibers and air pores, with an- air pore porosity of 1.52% (above 200 μm) that was twice that of FRUHPC (0.6%). In this paper, the mechanics and anticorrosion performance of ultra-high-performance polymer cement mortar prepared with seawater sea sand were comprehensively evaluated, and the mechanism of performance difference between SSUHPC and FRUHPC was revealed, conducive to the targeted improvement of sea sand concrete.
Previous research showed that the concrete’s strength is obviously decreased when river sand was substituted by desert sand in abundance. In this paper, a new type of fibre-reinforced ultra high-strength desert sand mortar is studied. In the mix design of mortar, low W/B was used to save water. Also, fly ash and silica fume were adopted to partly replace cement, and desert sand was used to completely take the place of river sand. At the same time, steel fibre was used to improve the toughness. The pore structure changes of different desert sand ultra high strength mortar were studied by MIP. SEM and XRD were adopted to study the microstructure and hydration product changes. The results are as follows: the mortar’s mechanical properties are improved when the desert sand content rise. When desert sand was adopted to substitute river sand completely, the mortar’s compressive strength was increased by 36.91%, which reached 149.08 MPa. With the desert sand’s addition, the mortar’s porosity decreases and its pore structure is optimized. Desert sand played an active part in promoting the hydration of mortar, increasing hydration products, densifying the mortar structure and improving the mortar’s mechanical properties..The research in this paper solves the problem that the high-content desert sand mortar’s mechanical properties cannot meet the demand, and provides the actual application of desert sand in mortar a theoretical basis.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
customersupport@researchsolutions.com
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.