No abstract

Herein, point light detection and ranging inertial odometry (LIO) is presented: a robust and high‐bandwidth light detection and ranging (LiDAR) inertial odometry with the capability to estimate extremely aggressive robotic motions. Point‐LIO has two key novelties. The first one is a point‐by‐point LIO framework that updates the state at each LiDAR point measurement. This framework allows an extremely high‐frequency odometry output, significantly increases the odometry bandwidth, and fundamentally removes the artificial in‐frame motion distortion. The second one is a stochastic process‐augmented kinematic model which models the IMU measurement as an output. This new modeling method enables accurate localization and reliable mapping for aggressive motions even with inertial measurement unit (IMU) measurements saturated in the middle of the motion. Various real‐world experiments are conducted for performance evaluation. Overall, Point‐LIO is capable to provide accurate, high‐frequency odometry (4–8 kHz) and reliable mapping under severe vibrations and aggressive motions with high angular velocity (75 rad s−1) beyond the IMU measuring ranges. Furthermore, an exhaustive benchmark comparison is conducted. Point‐LIO achieves consistently comparable accuracy and time consumption. Finally, two example applications of Point‐LIO are demonstrated, one is a racing drone and the other is a self‐rotating unmanned aerial vehicle, both have aggressive motions.

Uncrewed aerial vehicles (UAVs) rely heavily on visual sensors to perceive obstacles and explore environments. Current UAVs are limited in both perception capability and task efficiency because of a small sensor field of view (FoV). One solution could be to leverage self-rotation in UAVs to extend the sensor FoV without consuming extra power. This natural mechanism, induced by the counter-torque of the UAV motor, has rarely been exploited by existing autonomous UAVs because of the difficulties in design and control due to highly coupled and nonlinear dynamics and the challenges in navigation brought by the high-rate self-rotation. Here, we present powered-flying ultra-underactuated LiDAR (light detection and ranging) sensing aerial robot (PULSAR), an agile and self-rotating UAV whose three-dimensional position is fully controlled by actuating only one motor to obtain the required thrust and moment. The use of a single actuator effectively reduces the energy loss in powered flights. Consequently, PULSAR consumes 26.7% less power than the benchmarked quadrotor with the same total propeller disk area and avionic payloads while retaining a good level of agility. Augmented by an onboard LiDAR sensor, PULSAR can perform autonomous navigation in unknown environments and detect both static and dynamic obstacles in panoramic views without any external instruments. We report the experiments of PULSAR in environment exploration and multidirectional dynamic obstacle avoidance with the extended FoV via self-rotation, which could lead to increased perception capability, task efficiency, and flight safety.

Bundle adjustment (BA) on LiDAR point clouds has been extensively investigated in recent years due to its ability to optimize multiple poses together, resulting in high accuracy and global consistency for point cloud. However, the accuracy and speed of LiDAR bundle adjustment depend on the quality of plane extraction, which provides point association for LiDAR BA. In this study, we propose a novel and efficient voxelbased approach for plane extraction that is specially designed to provide point association for LiDAR bundle adjustment. To begin, we partition the space into multiple voxels of a fixed size and then split these root voxels based on whether the points are on the same plane, using an octree structure. We also design a novel plane determination method based on principle component analysis (PCA), which segments the points into four even quarters and compare their minimum eigenvalues with that of the initial point cloud. Finally, we adopt a plane merging method to prevent too many small planes from being in a single voxel, which can increase the optimization time required for BA. Our experimental results on HILTI demonstrate that our approach achieves the best precision and least time cost compared to other plane extraction methods.