Since ancient Egypt, orthosis was generally made from wood and then later replaced with metal and leather which are either heavy, bulky, or thick decreasing comfort among the wearers. After the age of revolution, the manufacturing of products using plastics and carbon composites started to spread due to its low cost and form-fitting feature whereas carbon composite were due to its high strength/stiffness to weight ratio. Both plastic and carbon composite has been widely applied into medical devices such as the orthosis and prosthesis. However, carbon composite is also quite expensive, making it the less likely material to be used as an Ankle-Foot Orthosis (AFO) material whereas plastics has low strength. Kenaf composite has a high potential in replacing all the current materials due to its flexibility in controlling the strength to weight ratio properties, cost-effectiveness, abundance of raw materials, and biocompatibility. The aim of this review paper is to discuss on the possibility of using kenaf composite as an alternative material to fabricate orthotics and prosthetics. The discussion will be on the development of orthosis since ancient Egypt until current era, the existing AFO materials, the problems caused by these materials, and the possibility of using a Kenaf fiber composite as a replacement of the current materials. The results show that Kenaf composite has the potential to be used for fabricating an AFO due to its tensile strength which is almost similar to polypropylene's (PP) tensile strength, and the cheap raw material compared to other type of materials.

Each year, more than 330 million tons of plastic are produced worldwide. The main consumers of plastics are the packaging (40%), building (20%) and automotive (8%) industries, as well as for the manufacture of household appliances. The vast majority of industrial plastics are not biodegradable and, therefore, create environmental problems due to the increase in the amount of solid waste. Studies have been conducted to produce biodegradable materials such as bioplastics to overcome this environmental problem. Bioplastics are defined as materials that are bio-based, biodegradable, or both; they can provide excellent biodegradability and can be used to help alleviate environmental problems. Therefore, this article presents an overview of the introduction of bioplastic materials and classifications, and a comprehensive review of their drawbacks and areas of importance, including basic and applied research, as well as biopolymer mixtures and biocomposites developed in the last decade. At the same time, this article provides insights into the development of bioplastics research to meet the needs of many industries, especially in the packaging industry in Malaysia. This review paper also focuses generally on bioplastic packaging applications such as food and beverage, healthcare, cosmetics, etc.

No abstract

No abstract

No abstract