A high demand for green and eco-friendly triboelectric nanogenerators (TENGs) has multiplied the importance of their degradability for biomedical applications. However, the charge generation of current eco-friendly TENGs is generally limited. In this research, a flexible TENG based on a silk fibroin (SF) fibrous layer and a polycaprolactone (PCL)/graphene oxide (GO) fibrous layer was developed. Moreover, the PCL/GO layer was surface modified using various concentrations of GO (0, 1.5, 3, 6, and 9 wt%). We demonstrated that surface modification using GO nanosheets significantly improved the output of the TENG. Notably, the optimized GO modified layer resulted in a voltage of 100 V, a current of 3.15 mA m −2 , and a power density of 72 mWm −2 . Moreover, a thin PCL layer applied as an encapsulation layer did not significantly modulate the performance of the TENG. Furthermore, during 28 d of soaking in a phosphate buffer solution, the proposed TENG was able to successfully generate electricity. The TENG was also proposed to be used for the electrical stimulation of PC12 cells. The results confirmed that this self-powered electrical stimulator could promote the attachment and proliferation of PC12 cells. Therefore, we have shown the potential for an eco-friendly and cost-effective TENG based on GO modified PCl/GO and silk fibrous layers to be used as a power source for biomedical applications.

No abstract

No abstract

The global promotion of electric vehicles (EVs) through various incentives has led to a significant increase in their sales. However, the prolonged charging duration remains a significant hindrance to the widespread adoption of these vehicles and the broader electrification of transportation. While DC-fast chargers have the potential to significantly reduce charging time, they also result in high power demands on the grid, which can lead to power quality issues and congestion. One solution to this problem is the integration of a battery energy storage system (BESS) to decrease peak power demand on the grid. This paper presents a review of the state-of-the-art use of DC-fast chargers coupled with a BESS. The focus of the paper is on industrial charger architectures and topologies. Additionally, this paper presents various reliability-oriented design methods, prognostic health monitoring techniques, and low-level/system-level control methods. Special emphasis is placed on strategies that can increase the lifetime of these systems. Finally, the paper concludes by discussing various cooling methods for power electronics and stationary/EV batteries.