No abstract

Goose bone is traditionally applied for many ailments including bone fractures. Goose bone that consists of calcium phosphate plays a major role in bone regeneration. In this study, the production of goose bone ash (GBA) was translated from a traditional process into one of a laboratory scale via thermal and mechanical methods. The GBA was thermally processed via calcination at 300 °C and 900 °C. The differences in physicochemical properties between studied GBA (SGBA) and commercial GBA (CGBA) were elucidated via Fourier transform infrared (FT-IR), X-ray fluorescence (XRF), X-ray diffraction (XRD) and electron diffraction X-Ray (EDX). The morphological properties of SGBA and CGBA were characterized using field emission scanning electron microscopy (FESEM) in which nano-sized particles were detected. The results showed that the SGBA of 300 °C had comparable physicochemical properties to those of CGBA. A high processing temperature was associated with decreasing organic compounds and increasing crystallinity. The finding from EDX suggests that sintering at 900 °C (SGBA 900) demonstrated the presence of hydroxyapatite in the mineralogical phase and had a Ca/P atomic ratio of 1.64 which is comparable to the ideal stoichiometric ratio of 1.67. Findings from this study could be used for the further exploration of GBA as a potential material for bone regeneration via the elucidation of their biological properties in the next experimental setting.

No abstract

The aim of this study was to determine the effects of two types of coumarin derivatives, namely, 3-acetylcoumarin (AC) and coumarin thiosemicarbazone (CT) on surface characteristics such as the roughness, hardness, and morphology of resin-modified glass-ionomer cement (RMGIC). The release of coumarin from the fabricated RMGIC was also investigated. AC and CT at 1.0% (w/w) concentration were added into 0.3 g of RMGIC powder and mixed with 0.1 g of polyacrylic acid. The fabricated RMGIC-AC and RMGIC-CT were evaluated for surface characteristics such as roughness, hardness and topography. The coumarin release of AC and CT from RMGIC was also determined. The RMGIC-CT demonstrated a decreased roughness value among the materials. The surface roughness exhibited by the RMGIC was statistically higher (p < 0.05) than that of fabricated materials. The RMGIC-AC was observed to have the highest hardness value compared to the RMGIC-CT and RMGIC, and this value was significantly higher (p < 0.05). The surface morphologies of the RMGIC-AC and RMGIC-CT showed a number of pores and irregular surfaces. Meanwhile, the surface roughness value of the RMGIC was statistically higher (p < 0.05) than both RMGIC-AC and RMGIC-CT. In conclusion, the large-sized AC particles significantly increased the surface hardness of the fabricated RMGIC. Conversely, the particle size of both coumarins were not influenced the surface roughness value and the coumarin release profile of fabricated RMGICs.