No abstract

No abstract

This work aimed to synthesize biodiesel from Ricinus communis L., using calcium oxide (CaO) nanoparticles as a catalyst. The CaO nanoparticles were examined by scanning electron microscopy (SEM) and X-Ray Diffraction (XRD). The physico-chemical properties of biodiesel were studied through H and C-NMR, GC-MS, FT-IR, and fuel properties were studied according to ASTM and EN standard methods. The oil content of the feedstock was 53.7% with a free fatty acid (FFA) content of 0.89 mg KOH/g. The suitable condition for the optimum yield (89%) of biodiesel was 1:15 of oil to methanol using 20 mg of catalyst at a temperature of 60 °C for 80 to 100 min of reaction time. The H and C-NMR confirm the biodiesel synthesis by showing important peaks at 3.661, 2.015–2.788, 24.83–34.16 and 174.26 and 130.15 ppm. Similarly, GC-MS spectroscopy confirmed 18 different types of fatty acid methyl esters (FAME) in the biodiesel sample. FT-IR spectroscopy confirmed the synthesis of biodiesel by showing characteristic peaks of biodiesel formation in the range of 1725–1750 cm−1 and 1000–1300 cm−1. The fuel properties were compared with the international ASTM and EN standards. The physico-chemical properties confirm that RCB is both an engine and environmentally friendly fuel.

Pinus is one of the most economical and ecological important conifers, model specie for studying sequence divergence and molecular phylogeney of gymnosperms. The less availability of information for genome resources enable researchers to conduct evolutionary studies of Pinus species. To improve understanding, we firstly reported, previously released chloroplast genome of 72 Pinus species, the sequence variations, phylogenetic relationships and genome divergence among Pinus species. The results displayed 7 divergent hotspot regions (trnD-GUC, trnY-GUA, trnH-GUG, ycf1, trnL-CAA, trnK-UUU and trnV-GAC) in studied Pinus species, which holds potential to utilized as molecular genetic markers for future phylogenetic studies in Pinnus species. In addition, 3 types of repeats (tandem, palindromic and dispersed) were also studied in Pinus species under investigation. The outcome showed P. nelsonii had the highest, 76 numbers of repeats, while P. sabiniana had the lowest, 13 13 numbers of repeats. It was also observed, constructed phylogenetic tree displayed division into two significant diverged clades: single needle (soft pine) and double-needle (hard pine). Theoutcome of present investigation, based on the whole chloroplast genomes provided novel insights into the molecular based phylogeny of the genus Pinus which holds potential for its utilization in future studies focusing genetic diversity in Pinnus species.

Pesticides have great potential to contaminate resources of drinking water by percolating and leaching, when applied in the agriculture sector as well as in domestic region. Activated carbon (AC) and Biochar (BCH) were used for adsorption in a fixed-bed column system. Both of the adsorbent-packed columns indicated an increase in the breakthrough time for atrazine from 3350 to 5800 min and 3200 to 5700 min, chlorothalanil 3200–5600 min and 3150–5550 min, β-endosulfan 3050–5400 min and 2950–5400 min, and α-endosulfan 2900–5200 min and 2850–5200 min with bed heights from 10 cm to 15 cm, respectively. Similarly, when flow rate increased from 0.5 to 1.5 mL min−1 and contaminant concentration from 50–100 µg L−1, it resulted in a decrease in exhaust time. The models of Yoon–Nelson (R2 = 0.9427) and Thomas (R2 = 0.9921) describe the process of adsorption to be best well-under optimal conditions. Both the adsorbents would be efficiently utilized as the best adsorbents to remediate pesticide-contaminated water under optimal conditions. Pesticides adsorption onto adsorbents followed the order of atrazine > chlorothalanil > β-endosulfan > α-endosulfan.