Considering sustainable mining, the use of seawater in mineral processing to replace conventional water is an attractive alternative, especially in cases where this resource is limited. However, the use of this aqueous medium generates a series of challenges; specifically, in the seawater flotation process, it is necessary to adapt traditional reagents to the aqueous medium or to propose new reagents that achieve better performance and are environmentally friendly. In this research, the technical feasibility of using recycled vegetable oil (RVO) as a collector of copper sulfide minerals in the flotation process using seawater was studied. The study considered the analysis of the metallurgical indexes when different concentrations of collector and foaming reagent were used, considering as collectors the RVO, potassium amyl xanthate (PAX) and mixtures of these, in addition to the methyl isobutyl carbinol (MIBC) as foaming agent. In addition, it was evidenced that the best metallurgical indexes were achieved using 40 g/t of RVO and 15 g/t of MIBC, which corresponded to an enrichment ratio of 6.29, a concentration ratio of 7.01, a copper recovery of 90.06% and a selectivity index with respect to pyrite of 4.03 and with respect to silica of 12.89. Finally, in relation to the study of the RVO and PAX collector mixtures, it was found that a mixture of 60 g/t of RVO and 40 g/t of PAX in the absence of foaming agent presented the best results in terms of copper recovery (98.66%) and the selectivity index with respect to pyrite (2.88) and silica (14.65), improving PAX selectivity and recovery compared to the use of RVO as the only collector. According to these results, it is possible to conclude that the addition of RVO improved the selectivity in the rougher flotation for copper sulfides in seawater. This could be an interesting opportunity for the industry to minimize the costs of the flotation process and generate a lower environmental impact.