The controllable incorporation of multiple immiscible elements into a single nanoparticle merits untold scientific and technological potential, yet remains a challenge using conventional synthetic techniques. We present a general route for alloying up to eight dissimilar elements into single-phase solid-solution nanoparticles, referred to as high-entropy-alloy nanoparticles (HEA-NPs), by thermally shocking precursor metal salt mixtures loaded onto carbon supports [temperature ~2000 kelvin (K), 55-millisecond duration, rate of ~10 K per second]. We synthesized a wide range of multicomponent nanoparticles with a desired chemistry (composition), size, and phase (solid solution, phase-separated) by controlling the carbothermal shock (CTS) parameters (substrate, temperature, shock duration, and heating/cooling rate). To prove utility, we synthesized quinary HEA-NPs as ammonia oxidation catalysts with ~100% conversion and >99% nitrogen oxide selectivity over prolonged operations.

OBJECTIVE Patients with obesity are at increased risk of exacerbations from viral respiratory infections. However, the association of obesity with the severity of coronavirus disease 2019 (COVID-19) is unclear. We examined this association using data from the only referral hospital in Shenzhen, China. RESEARCH DESIGN AND METHODS A total of 383 consecutively hospitalized patients with COVID-19 admitted from 11 January 2020 to 16 February 2020 and followed until 26 March 2020 at the Third People’s Hospital of Shenzhen were included. Underweight was defined as a BMI <18.5 kg/m2, normal weight as 18.5–23.9 kg/m2, overweight as 24.0–27.9 kg/m2, and obesity as ≥28 kg/m2. RESULTS Of the 383 patients, 53.1% were normal weight, 4.2% were underweight, 32.0% were overweight, and 10.7% were obese at admission. Obese patients tended to have symptoms of cough (P = 0.03) and fever (P = 0.06) compared with patients who were not obese. Compared with normal weight patients, those who were overweight had 1.84-fold odds of developing severe COVID-19 (odds ratio [OR] 1.84, 95% CI 0.99–3.43, P = 0.05), while those who were obese were at 3.40-fold odds of developing severe disease (OR 3.40, 95% CI 1.40–2.86, P = 0.007), after adjusting for age, sex, epidemiological characteristics, days from disease onset to hospitalization, presence of hypertension, diabetes, cardiovascular disease, chronic obstructive pulmonary disease, liver disease, and cancer, and drug used for treatment. Additionally, after similar adjustment, men who were obese versus those who were normal weight were at increased odds of developing severe COVID-19 (OR 5.66, 95% CI 1.80–17.75, P = 0.003). CONCLUSIONS In this study, obese patients had increased odds of progressing to severe COVID-19. As the severe acute respiratory syndrome coronavirus 2 may continue to spread worldwide, clinicians should pay close attention to obese patients, who should be carefully managed with prompt and aggressive treatment.

Plasmonic metal nanoparticles are a category of plasmonic materials that can efficiently convert light into heat under illumination, which can be applied in the field of solar steam generation. Here, this study designs a novel type of plasmonic material, which is made by uniformly decorating fine metal nanoparticles into the 3D mesoporous matrix of natural wood (plasmonic wood). The plasmonic wood exhibits high light absorption ability (≈99%) over a broad wavelength range from 200 to 2500 nm due to the plasmonic effect of metal nanoparticles and the waveguide effect of microchannels in the wood matrix. The 3D mesoporous wood with numerous low‐tortuosity microchannels and nanochannels can transport water up from the bottom of the device effectively due to the capillary effect. As a result, the 3D aligned porous architecture can achieve a high solar conversion efficiency of 85% under ten‐sun illumination (10 kW m−2). The plasmonic wood also exhibits superior stability for solar steam generation, without any degradation after being evaluated for 144 h. Its high conversion efficiency and excellent cycling stability demonstrate the potential of newly developed plasmonic wood to solar energy‐based water desalination.

Wood, an earth-abundant material, is widely used in our everyday life. With its mesoporous structure, natural wood is comprised of numerous long, partially aligned channels (lumens) as well as nanochannels that stretch along its growth direction. This wood mesostructure is suitable for a range of emerging applications, especially as a membrane/separation material. Here, we report a mesoporous, three-dimensional (3D) wood membrane decorated with palladium nanoparticles (Pd NPs/wood membrane) for efficient wastewater treatment. The 3D Pd NPs/wood membrane possesses the following advantages: (1) the uniformly distributed lignin within the wood mesostructure can effectively reduce Pd(II) ions to Pd NPs; (2) cellulose, with its abundant hydroxyl groups, can immobilize Pd NPs; (3) the partially aligned mesoporous wood channels as well as their inner ingenious microstructures increase the likelihood of wastewater contacting Pd NPs decorating the wood surface; (4) the long, Pd NP-decorated channels facilitate bulk treatment as water flows through the entire mesoporous wood membrane. As a proof of concept, we demonstrated the use and efficiency of a Pd NPs/wood membrane to remove methylene blue (MB, CHNClS) from a flowing aqueous solution. The turnover frequency of the Pd NPs/wood membrane, ∼2.02 mol·mol·min, is much higher than the values reported in the literature. The water treatment rate of the 3D Pd NPs/wood membrane can reach 1 × 10 L·m·h with a high MB removal efficiency (>99.8%). The 3D mesoporous wood membrane with partially aligned channels exhibits promising results for wastewater treatment and is applicable for an even wider range of separation applications.