This paper reports the utilization of short-wave near-infrared (SW-NIR) transmission spectroscopy for rapid and conclusive analysis of alcoholic content (% v/v) in beverages. This spectral region is interesting because common visible diode array spectrometers can be utilized, reducing time and costs in comparison with traditional near-infrared or mid-infrared instruments. A correction of external temperature influence is necessary, and for this purposes two calibration transfer procedures were compared: piecewise direct standardization (PDS) and orthogonal signal correction (OSC). The RMSEP found for the alcoholic content model at 20 degrees C was 0.13% v/v and, after application of transfer calibration procedures at other temperatures (15, 25, 30 and 35 degrees C) using the model built at 20 degrees C, errors of the same order of magnitude were obtained.

No abstract

The feasibility of using near infrared (NIR) transmission spectroscopy for rapid and conclusive determination of contaminants in lubricant oil was investigated. The NIR spectrum in the region from 1300 to 1700 nm was used to predict gasoline and ethylene glycol concentrations present in lubricant oil. A graphically-oriented local multivariate calibration modelling procedure called interval partial least-squares (iPLS) was applied to find variable intervals that featured the lowest prediction error. When compared with the full spectrum PLS model, better results were obtained through the iPLS program. High correlation coefficients and low root mean square errors of cross-validation (RMSECV) were obtained for gasoline (R = 0.98, RMSECV = 0.38%, range = 0.2-8.0% w/w) and ethylene glycol determinations (R = 0.97, RMSECV = 0.04%, range = 0.06 to 0.7% w/w), indicating that the proposed methodology can be used for contaminant determinations in lubricant oil.