The precessing vortex core (PVC) represents a helical-shaped coherent flow structure typically occurring in both reacting and nonreacting swirling flows. Until now, the fundamental impact of the PVC on flame dynamics, thermoacoustic instabilities, and pollutant emissions is still unclear. In order to identify and investigate these mechanisms, the PVC needs to be controlled effectively with a feedback control system. A previous study successfully applied feedback control in a generic swirling jet setup. The next step is to transfer this approach into a swirl-stabilized combustor, which poses big challenges on the actuator and sensor design and placement. In this paper, different actuator designs are investigated with the goal of controlling the PVC dynamics. The actuation strategy aims to force the flow near the origin of the instability—the so-called wavemaker. To monitor the PVC dynamics, arrays of pressure sensors are flush-mounted at the combustor inlet and the combustion chamber walls. The best sensor placement is evaluated with respect to the prediction of the PVC dynamics. Particle image velocimetry (PIV) is used to evaluate the passive impact of the actuator shape on the mean flow field. The performance of each actuator design is evaluated from lock-in experiments showing excellent control authority for two out of seven actuators. All measurements are conducted at isothermal conditions in a prototype of a swirl-stabilized combustor.

No abstract

In this study, we apply periodic flow excitation of the precessing vortex core at the centerbody of a swirl-stabilized combustor to investigate the impact of the precessing vortex core on flame shape, flame dynamics, and especially thermoacoustic instabilities. The current control scheme is based on results from linear stability theory that determine the precessing vortex core as a global hydrodynamic instability with its maximum receptivity to open-loop actuation located near the center of the combustor inlet. The control concept is first validated at isothermal conditions. This is of utmost importance for the proceeding studies that focus on the exclusive impact of the precessing vortex core on the combustion dynamics. Subsequently, the control is applied to reacting conditions considering lean premixed turbulent swirl flames. Considering thermoacoustically stable flames first, it is shown that the actuation locks onto the precessing vortex core when it is naturally present in the flame, which allows the precessing vortex core frequency to be controlled. Moreover, the control allows the precessing vortex core to be excited in conditions where it is naturally suppressed by the flame, which yields a very effective possibility to control the precessing vortex core amplitude. The control is then applied to thermoacoustically unstable conditions. Considering perfectly premixed flames first, it is shown that the precessing vortex core actuation has only a minor effect on the thermoacoustic oscillation amplitude. However, we observe a continuous increase of the thermoacoustic frequency with increasing precessing vortex core amplitude due to an upstream displacement of the mean flame and resulting reduction of the convective time delay. Considering partially premixed flames, the precessing vortex core actuation shows a dramatic reduction of the thermoacoustic oscillation amplitude. In consideration of the perfectly premixed cases, we suspect that this is caused by the precessing vortex core-enhanced mixing of equivalence ratio fluctuations at the flame root and due to a reduction of time delays due to mean flame displacement.

The precessing vortex core (PVC) represents a helical-shaped coherent flow structure typically occurring in both reacting and non-reacting swirling flows. Until now the fundamental impact of the PVC on flame dynamics, thermoacoustic instabilities and pollutant emissions is still unclear. In order to identify and investigate these mechanisms, the PVC needs to be controlled effectively with a feedback control system. A previous study successfully applied feedback control in a generic swirling jet setup. The next step is to transfer this approach into a swirl-stabilized combustor, which poses big challenges on the actuator and sensor design and placement. In this paper, different actuator designs are investigated with the goal of controlling the PVC dynamics. The actuation strategy aims to force the flow near the origin of the instability — the so-called wavemaker. To monitor the PVC dynamics, arrays of pressure sensors are flush-mounted at the combustor inlet and the combustion chamber walls. The best sensor placement is evaluated with respect to the prediction of the PVC dynamics. Particle image velocimetry is used to evaluate the passive impact of the actuator shape on the mean flow field. The performance of each actautor design is evaluated from lock-in experiments showing excellent control authority for two out of seven actuators. All measurements are conducted at isothermal conditions in a prototype of a swirl-stabilized combustor.